Applications

Here is a tentative list of the works (journal papers and books) using Neper. If you think your work should be listed here, please contact us.

This list is also available on Neper’s Google Scholar page.

Journal Covers

On a few occasions, Neper images made journal covers. Congratulations to the authors!

• B Flipon, C Keller, R Quey and F Barbe, A full-field crystal-plasticity analysis of bimodal polycrystals, International Journal of Solids and Structures, vol. 184, pp. 178–192, 2020. Flipon et al.’s journal cover

• R Carson, M Obstalecki, M Miller and P Dawson, Characterizing Heterogeneous Intragranular Deformations in Polycrystalline Solids Using Diffraction-Based and Mechanics-Based Metrics, Modelling and Simulation in Materials Science and Engineering, vol. 25, pp. 055008, 2017. Carson et al.’s journal cover

2022

• B Engel, M Huth and C Hyde, Numerical Investigation into the Influence of Grain Orientation Distribution on the Local and Global Elastic-Plastic Behaviour of Polycrystalline Nickel-Based Superalloy INC-738 LC, Crystals, https://doi.org/10.3390/cryst12010100.

• O Bulut, SS Acar and T Yalçinkaya, The influence of thickness/grain size ratio in microforming through crystal plasticity, Procedia Structural Integrity, https://doi.org/10.1016/j.prostr.2021.12.069.

• HB Boubaker, C Mareau, Y Ayed, G Germain and A Tidu, A crystal plasticity-based constitutive model for near-β titanium alloys under extreme loading conditions: Application to the Ti17 alloy, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2021.104198.

• X Li, X Li, RDK Misra and Z Chen, Grain size effect on shearing performance of copper foil: A polycrystal plasticity investigation, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2022.104212.

• V Langlois, CT Nguyen, F Detrez, J Guilleminot and C Perrot, Permeability of polydisperse solid foams, Physical Review E, https://doi.org/10.1103/PhysRevE.105.015101.

• J Wang, C Zhou, Analysis of crack initiation location and its influencing factors of fretting fatigue in aluminum alloy components, Chinese Journal of Aeronautics, https://doi.org/10.1016/j.cja.2021.12.011.

• X Zhang, X Lu, J Zhao, Q Kan, Z Li, G Kang, Temperature effect on tensile behavior of an interstitial high entropy alloy: crystal plasticity modeling, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2021.103201.

• P Fernandez-Zelaia, Y Lee, S Dryepondt, MM Kirka, Creep anisotropy modeling and uncertainty quantification of an additively manufactured Ni-based superalloy, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2021.103177.

• E Natkowski, P Sonnweber-Ribic, S Münstermann, Determination of fatigue lifetimes with a micromechanical short crack model for the high-strength steel SAE 4150, International Journal of Fatigue, https://doi.org/10.1016/j.ijfatigue.2021.106621.

• D Zhu, W Zhang and Z Ding, Dislocation Density Evolution in Low-Cycle Fatigue of Steels Using Dislocation-Based Crystal Plasticity, Journal of Engineering Mechanics, https://doi.org//10.1061/(ASCE)EM.1943-7889.0002063.

• T Grabec, IA Veres and M Ryzy, Surface acoustic wave attenuation in polycrystals: Numerical modeling using a statistical digital twin of an actual sample, Ultrasonics, https://doi.org/10.1016/j.ultras.2021.106585.

2021

• A Rovinelli, MC Messner, DM Parks and TL Sham, Accurate Effective Stress Measures: Predicting Creep Life for 3D Stresses Using 2D and 1D Creep Rupture Simulations and Data, Integrating Materials and Manufacturing Innovation, https://doi.org/10.1007/s40192-021-00228-1.

• A Rajaei, Y Deng, O Schenk, S Rooein, A Bezold and C Broeckmann, Numerical Modelling of the Powder Metallurgical Manufacturing Chain of High Strength Sintered Gears, Chinese Journal of Mechanical Engineering, https://doi.org/10.1186/s10033-021-00646-4.

• L Yin and O Umezawa, Crystal plasticity analysis of temperature-sensitive dwell fatigue in Ti-6Al-4V titanium alloy for an aero-engine fan disc, International Journal of Fatigue, https://doi.org/10.1016/j.ijfatigue.2021.106688.

• X Hu, X Gong, N Xie, Q Zhu, P Guo, H Hu and J Ma, Modeling crack propagation in heterogeneous granite using grain-based phase field method, Theoretical and Applied Fracture Mechanics, https://doi.org/10.1016/j.tafmec.2021.103203.

• JY Zheng, JQ Ran and MW Fu, Constitutive Modeling of Multiscale Polycrystals Considering Grain Structures and Orientations, International Journal of Mechanical Sciences, https://doi.org/10.1016/j.ijmecsci.2021.106992.

• K Zhong, S Wang, K Liu, D Xu, J Yao, Fourier Transform Analysis on Random Quasi-Phase-Matched Nonlinear Optical Interactions, IEEE Photonics Journal, https://doi.org/10.1109/JPHOT.2021.3134666.

• N Grilli, D Hu, D Yushu, F Chen, W Yan, Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method, Computational Mechanics, https://doi.org/10.1007/s00466-021-02116-z.

• AG Neto, B Hudobivnik, TF Moherdaui and P Wriggers, Flexible polyhedra modeled by the virtual element method in a discrete element context, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2021.114163.

• C Fang, J Gong, M Jia, Z Nie, B Li, A Mohammed and L Zhao, DEM simulation of the shear behaviour of breakable granular materials with various angularities, Advanced Powder Technology, https://doi.org/10.1016/j.apt.2021.09.009.

• S Rezaei, A Asheri and BX Xu, A consistent framework for chemo-mechanical cohesive fracture and its application in solid-state batteries, Journal of the Mechanics and Physics of Solids, https://doi.org/10.1016/j.jmps.2021.104612.

• U Ro, S Kim, Y Kim and MK Kim, Creep-Fatigue damage analysis of modified 9Cr–1Mo steel based on a Voronoi crystalline model, International Journal of Pressure Vessels and Piping, https://doi.org/10.1016/j.ijpvp.2021.104541.

• W Zhao, J Sun and Z Huang, Three-dimensional graphene-carbon nanotube reinforced ceramics and computer simulation, Ceramics International, https://doi.org/10.1016/j.ceramint.2021.08.304.

• KA Meyer and A Menzel, A distortional hardening model for finite plasticity, International Journal of Solids and Structures, https://doi.org/10.1016/j.ijsolstr.2021.111055.

• X Zhang and C Oskay, Modeling and Numerical Investigation of Mechanical Twinning in β-HMX Crystals Subjected to Shock Loading, Modelling and Simulation in Materials Science and Engineering, https://doi.org/10.1088/1361-651X/ac21a6.

• A Vuppala, A Krämer and J Lohmar, On Sampling Discrete Orientations from XRD for Texture Representation in Aggregates with Varying Grain Size, Crystals, https://doi.org/10.3390/cryst11091021.

• IAR Lopes, FMA Pires, Unlocking the Potential of Second-order Computational Homogenisation: An Overview of Distinct Formulations and a Guide for their Implementation, Archives of Computational Methods in Engineering, https://doi.org/10.1007/s11831-021-09611-9.

• T Beck, B Engel, L Mäde and S Ohneseit, Influence of Grain Orientation Distribution on the High Temperature Fatigue Behaviour of Notched Specimen Made of Polycrystalline Nickel-Base Superalloy, Metals, https://doi.org/10.3390/met11050731.

• L Fourel, JP Noyel, E Bossy, X Kleber, P Sainsot and F Ville, Towards a Grain-scale Modeling of Crack Initiation in Rolling Contact Fatigue-Part 1: Shear Stress Considerations, Tribology International, https://doi.org/10.1016/j.triboint.2021.107224.

• RJ Lane, AM Momen, MS Kesler, J Brechtl, O Rios, K Nawaz and R Mirzaeifar, Developing an experimental-computational framework to investigate the deformation mechanisms and mechanical properties of Al-8Ce-10Mg alloys at micro and macroscales, Materials Today Communications, https://doi.org/10.1016/j.mtcomm.2021.102674.

• D Depriester, R Kubler, Grain size estimation in polycrystals: solving the corpuscle problem using Maximum Likelihood Estimation, Journal of Structural Geology, https://doi.org/10.1016/j.jsg.2021.104418.

• S Zhang, S Qiu, P Kou, S Li, P Li, S Yan, Investigation of Damage Evolution in Heterogeneous Rock Based on the Grain-Based Finite-Discrete Element Model, Materials, https://doi.org/10.3390/ma14143969.

• H Ding and Y Gao, Analysis of the strain dependence of the superconducting critical properties of single-crystal and polycrystalline Nb3Sn, Superconductor Science and Technology, vol 34, pp 075006.

• SS Kulkarni, V Gupta, D Senor, T Truster, A Soulami, A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates, Computational Materials Science https://doi.org/10.1016/j.commatsci.2021.110654.

• H Ge, JC Quezada, V Le Houerou, C Chazallon, Three-dimensional simulation of asphalt mixture incorporating aggregate size and morphology distribution based on contact dynamics method, Construction and Building Materials, https://doi.org/10.1016/j.conbuildmat.2021.124124.

• L Fourel, JP Noyel, E Bossy, X Kleber, P Sainsot, F Ville, Towards a Grain-scale Modeling of Crack Initiation in Rolling Contact Fatigue-Part 2: Persistent Slip Band Modeling, Tribology International, https://doi.org/10.1016/j.triboint.2021.107173.

• Y Bai, DA Santos, S Rezaei, P Stein, S Banerjee, B-X Xu, A chemo-mechanical damage model at large deformation: numerical and experimental studies on polycrystalline energy materials, International Journal of Solids and Structures, https://doi.org/10.1016/j.ijsolstr.2021.111099.

• J Wang, Y Wang, L Yang, T Chang and Q Jiang, Effects of Bedding Geometry and Cementation Strength on Shale Tensile Strength Based on Discrete Element Method, Shock and Vibration, https://doi.org/10.1155/2021/7805617.

• S Chandra, MK Samal, NN Kumar and VM Chavan, Simulation of Hall–Petch effect in alloy 690 using crystal plasticity model considering effect of grain boundaries, Materials Letters, https://doi.org/10.1016/j.matlet.2021.129915.

• IAR Lopes, BP Ferreira and FMA Pires, On the efficient enforcement of uniform traction and mortar periodic boundary conditions in computational homogenisation, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2021.113930.

• M Huang, SI Rokhlin and MJS Lowe, Finite element evaluation of a simple model for elastic waves in strongly scattering elongated polycrystals, JASA Express Letters, https://doi.org/10.1121/10.0005266.

• C-N Nguyen, G Cailletaud, F Barbe, B Marini, D-D Nguyen and H-T Phan, Identification of crystal plasticity parameters for a non-irradiated and irradiated A508 bainite steel, Metallurgical Research and Technology, https://doi.org/10.1051/metal/2021006.

• S El Shawish, T Mede, J Hure, A single grain boundary parameter to characterize normal stress fluctuations in materials with elastic cubic grains, European Journal of Mechanics-A/Solids, https://doi.org/10.1016/j.euromechsol.2021.104293.

• Y Liu, MK Kalkowski, M Huang, MJS Lowe, V Samaitis, V Cicenas and A Schumm, Can ultrasound attenuation measurement be used to characterise grain statistics in castings?, Ultrasonics, https://doi.org/10.1016/j.ultras.2021.106441.

• MP Echlin, M Kasemer, K Chatterjee, D Boyce, JC Stinville, PG Callahan, E Wielewski, J-S Park, JC Williams, RM Suter, TM Pollock, MP Miller and PR Dawson, Microstructure-Based Estimation of Strength and Ductility Distributions for alpha + beta Titanium Alloys, Metallurgical and Materials Transactions A, https://doi.org/10.1007/s11661-021-06233-5.

• M Huang, G Sha, P Huthwaite, SI Rokhlin and MJS Lowe, Longitudinal wave attenuation in polycrystals with elongated grains: 3D numerical and analytical modeling, The Journal of the Acoustical Society of America, https://doi.org/10.1121/10.0003955.

• Z Wang, S Yang, L Li, Y Tang and G Xu, A 3D Voronoi clump based model for simulating failure behavior of brittle rock, Engineering Fracture Mechanics, https://doi.org/10.1016/j.engfracmech.2021.107720.

• D Weisz-Patrault, S Sakout and A Ehrlacher, Energetic upscaling strategy for grain growth. II: Probabilistic macroscopic model identified by Bayesian techniques, Acta Materialia, https://doi.org/10.1016/j.actamat.2021.116805.

• C Böhm, B Hudobivnik, M Marino and P Wriggers, Electro-magneto-mechanically response of polycrystalline materials: Computational homogenization via the Virtual Element Method, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2021.113775.

• KO Coelho, PRB Devloo and SM Gomes, Error estimates for the Scaled Boundary Finite Element Method, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2021.113765.

• R Quey, G-H Fan, Y Zhang and D Juul Jensen, Importance of deformation-induced local orientation distributions for nucleation of recrystallisation, Acta Materialia, https://doi.org/10.1016/j.actamat.2021.116808.

• B Yan, S Jiang, L Hu, Y Zhang and D Sun, Crystal plasticity finite element simulation of NiTi shape memory alloy under canning compression based on constitutive model containing dislocation density, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2021.103830.

• M Gusenbauer, A Kovacs, H Oezelt, J Fischbacher, P Zhao, TG Woodcock and T Schrefl, Insights into MnAl-C nano-twin defects by micromagnetic characterization, Journal of Applied Physics, https://doi.org/10.1063/5.0035387.

• XF Li, HB Li, GK Zhang, MH Ju, J Zhao, Rate dependency mechanism of crystalline rocks induced by impacts: Insights from grain-scale fracturing and micro heterogeneity, International Journal of Impact Engineering, https://doi.org/10.1016/j.ijimpeng.2021.103855.

• CS Kim, SL Ding, JH Kim, C Yun, WY Yang, JZ Han, SQ Liu, HL Du, CS Wand and JB Zhang, Micromagnetic study of sphericity effect in bulk permanent magnets, Journal of Applied Physics, https://doi.org/10.1063/5.0040434.

• S Chandra, MK Samal, NN Kumar, VM Chavan, Atomistically informed crystal plasticity analysis of deformation behavior of alloy 690 including grain boundary effects, Materialia, https://doi.org/10.1016/j.mtla.2021.101053.

• B Ravaji and SP Joshi, A crystal plasticity investigation of grain size-texture interaction in magnesium alloys, Acta Materialia, https://doi.org/10.1016/j.actamat.2021.116743.

• T Fischer, S Ulan kyzy, O Munz and E Werner, Structure-property relationship of a nickel-based honeycomb sealing composite, Computational Materials Science, https://doi.org/10.1016/j.commatsci.2020.110270.

• H Yu, AD Taleghani, Z Lian, A New Look at Rock Mechanical Behavior from the Meso-Scale Grain, Journal of Petroleum Science and Engineering, https://doi.org/10.1016/j.petrol.2021.108373.

• N Grilli, E Tarleton, ACF Cocks, Neper2CAE and PyCiGen: Scripts to generate polycrystals and interface elements in Abaqus, SoftwareX, https://doi.org/10.1016/j.softx.2020.100651.

• M Huang, G Sha, P Huthwaite, SI Rokhlin and MJS Lowe, Elastic wave velocity dispersion in polycrystals with elongated grains: Theoretical and numerical analysis, The Journal of the Acoustical Society of America, https://doi.org/10.1121/10.0002916.

• L Qiao, Y He, H Wang, Z Shi, Z Li, G Xiao and L Yang, Effect of grain boundary deformation on the critical temperature degradation of superconducting Nb3Sn under hydrostatic pressure, Journal of Alloys and Compounds, https://doi.org/10.1016/j.jallcom.2020.158116.

• J Cappola, JC Stinville, MA Charpagne, PG Callahan, MP Echlin, TM Pollock, A Pilchak and M Kasemer, On the Localization of Plastic Strain in Microtextured Regions of Ti-6Al-4V, Acta Materialia, https://doi.org/10.1016/j.actamat.2020.116492.

• S Ganesan, M Yaghoobi, A Githens, Z Chen, S Daly, J Allison and VSundararaghavan, The effects of heat treatment on the response of WE43 Mg alloy: crystal plasticity finite element simulation and SEM-DIC experiment, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2020.102917.

• GZ Voyiadjis, J Jeong, JW Kysar, Grain size dependence of polycrystalline plasticity modeling in cylindrical indentation, Computational Mechanics, https://doi.org/10.1007/s00466-020-01940-z.

• XF Li, HB Li and J Zhao, Transgranular fracturing of crystalline rocks and its influence on rock strengths: Insights from a grain-scale continuum–discontinuum approach, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2020.113462.

2020

• F Barbe, I Benedetti, V Gulizzi, M Calvat and C Keller, Elucidating the effect of bimodal grain size distribution on plasticity and fracture behavior of polycrystalline materials, Journal of Multiscale Modelling, https://doi.org/10.1142/S1756973720500079.

• TF Fu, T Xu, PLP Wasantha, TH Yang, Y Nara and Z Heng, Time-dependent deformation and fracture evolution around underground excavations, Geomatics, Natural Hazards and Risk, https://doi.org/10.1080/19475705.2020.1856202.

• CT Nguyen, J Guilleminot, F Detrez, V Langlois, M Bornert, A Duval and C Perrot, Micro-Macro Acoustic Modeling of Heterogeneous Foams with Nucleation Perturbation, SAE Technical Paper, https://doi.org/10.4271/2020-01-1526.

• M Boåsen, CFO Dahlberg, P Efsing, J Faleskog, A weakest link model for multiple mechanism brittle fracture-Model development and application, Journal of the Mechanics and Physics of Solids, 2020.

• A Sharma, A Vijay, F Sadeghi, Finite Element Modeling of Fretting Wear in Anisotropic Composite Coatings: Application to HVOF Cr3C2–NiCr Coating, Tribology International, https://doi.org/10.1016/j.triboint.2020.106765.

• L Qiao, J Yang, X Yang, K Han, Z Li, G Xiao, L Yang, Grain boundary deformation in uniaxial strained Nb3Sn, Cryogenics, https://doi.org/10.1016/j.cryogenics.2020.103210.

• P Wriggers, Multilevel Material Modeling to Study Plastic Deformation for Sheet-Bulk Metal Forming Under Different Loading Histories, Sheet bulk metal forming, Springer.

• E Moshkelgosha and M Mamivand, Concurrent modeling of martensitic transformation and crack growth in polycrystalline Shape Memory Ceramics, Engineering Fracture Mechanics, https://doi.org/10.1016/j.engfracmech.2020.107403.

• R Ma and WC Sun, Phase field modeling of coupled crystal plasticity and deformation twinning in polycrystals with monolithic and splitting solvers, International Journal for Numerical Methods in Engineering, https://doi.org/10.1002/nme.6577.

• M Huang, G Sha, P Huthwaite, SI Rokhlin and MJS Lowe, Maximizing the accuracy of finite element simulation of elastic wave propagation in polycrystals, The Journal of the Acoustical Society of America, https://doi.org/10.1121/10.0002102.

• B Pulatsu, S Gonen, E Erdogmus, PB Lourenço, JV Lemos and J Hazzard, Tensile Fracture Mechanism of Masonry Wallettes Parallel to Bed Joints: A Stochastic Discontinuum Analysis, Modelling, https://doi.org/10.3390/modelling1020006.

• J Chen, P Zhang, Y Cheng, J Liu, On the crushing response of the functionally graded metallic foams based on 3D Voronoi model, Thin-Walled Structures, vol. 157, pp. 107085.

• Y Huillca, M Silva, C Ovalle, JC Quezada, S Carrasco, GE Villavicencio, Modelling size effect on rock aggregates strength using a DEM bonded-cell model, Acta Geotechnica, https://doi.org/10.1007/s11440-020-01054-z.

• S Tian, R Cao, J Zhou, F Xue, Y Liu, P Zhang, ZM Sun, A comparative study on the growth behaviors of Sn whiskers and hillocks in a Sn-Al alloy coating under different environments, Journal of Alloys and Compounds, https://doi.org/10.1016/j.jallcom.2020.157101.

• Y Guo, J He, H Jiang, Y Zhou, F Jin, C Song, A Simple Approach for Generating Random Aggregate Model of Concrete Based on Laguerre Tessellation and Its Application Analyses, Materials, vol. 13, pp. 3896, 2020.

• AM Schönhöbel, R Madugundo, JM Barandiarán, GC Hadjipanayis, D Palanisamy, T Schwarz, B Gault, D Raabe, K Skokov, O Gutfleisch, J Fischbacher and T Schrefl, Nanocrystalline Sm-based 1: 12 magnets, Acta Materialia, https://doi.org/10.1016/j.actamat.2020.08.075.

• Z Pawlas, I Karafiatova and L Heller, Random tessellations marked with crystallographic orientations, Spatial Statistics, https://doi.org/10.1016/j.spasta.2020.100469.

• M Bouchedjra, A Amrouche, T Kanit and MEA Belouchrani, Microstructural features effect on the evolution of cyclic damage for polycrystalline metals using a multiscale approach, International Journal of Damage Mechanics, https://doi.org/10.1177/1056789520950409.

• A Charmi, R Falkenberg, L Ávila, G Mohr, K Sommer, A Ulbricht, M Sprengel, R Saliwan Neumann, B Skrotzki and A Evans, Mechanical anisotropy of additively manufactured stainless steel 316L: An experimental and numerical study, Materials Science and Engineering: A, https://doi.org/10.1016/j.msea.2020.140154.

• PR Prakash, B Polatsu, PB Lourenco, M Azenha and JA Pereira, A meso-scale discrete element method framework to simulate thermo-mechanical failure of concrete subjected to elevated temperatures, Engineering Fracture Mechanics, https://doi.org/10.1016/j.engfracmech.2020.107269.

• T Xu, T-F Fu, MJ Heap, PG Meredith, TM Mitchell and P Baud, Mesoscopic Damage and Fracturing of Heterogeneous Brittle Rocks Based on Three-dimensional Polycrystalline Discrete Element Method, Rock Mechanics and Rock Engineering, https://doi.org/10.1007/s00603-020-02223-y.

• A Saini, S Unnikirishnakurup, CV Krishnamurthy, K Balasubramanian and T Sundarajan, Numerical study using finite element method for heat conduction on heterogeneous materials with varying volume fraction, shape and size of fillers, International Journal of Thermal Sciences, https://doi.org/10.1016/j.ijthermalsci.2020.106545.

• D An, X Zhang and S Zaefferer, The combined and interactive effects of orientation, strain amplitude, cycle number, stacking fault energy and hydrogen doping on microstructure evolution of polycrystalline high-manganese steels under low-cycle fatigue, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2020.102803.

• S Sakout, D Weisz-Patrault and A Ehrlacher, Energetic upscaling strategy for grain growth. i: Fast mesoscopic model based on dissipation, Acta Materialia, https://doi.org/10.1016/j.actamat.2020.06.032.

• B Pulatsu, E Erdogmus, PB Lourenço, JV Lemos and K Tuncay, Numerical modeling of the tension stiffening in reinforced concrete members via discontinuum models, Computational Particle Mechanics, https://doi.org/10.1007/s40571-020-00342-5.

• T Richeton, X Chen and S Berbenni, Misorientation dependence of the grain boundary migration rate: role of elastic anisotropy, Philosophical Magazine, https://doi.org/10.1080/14786435.2020.1779368.

• R Ma and W Sun, Computational thermomechanics for crystalline rock. Part II: Chemo-damage-plasticity and healing in strongly anisotropic polycrystals, Computer Methods in Applied Mechanics and Engineering, vol. 369, pp. 113184, 2020.

• H Hippke, S Hirsiger, B Berisha and Pavel Hora, Optimized and validated prediction of plastic yielding supported by cruciform experiments and crystal plasticity, International Journal of Material Forming, https://doi.org/10.1007/s12289-020-01569-6.

• S Yuan, Y Zhu, M Huang, S. Liang and Z Li, Dislocation-density based crystal plasticity model with hydrogen-enhanced localized plasticity in polycrystalline face-centered cubic metals, Mechanics of Materials, vol. 148, pp. 103472, 2020.

• J Nunes-Pereira, PMC Carneiro, A Maceiras, C Baudín and AP Silva, Modelling of elastic modulus of CaZrO3-MgO composites using isotropic elastic and anisotropic models, Journal of the European Ceramic Society, https://doi.org/10.1016/j.jeurceramsoc.2020.05.050.

• SM Tewari and RS Ayyagari, A novel approach to generating microstructurally-aware non-convex domains, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2020.113117.

• X Lu, J Zhao, C Yu, Z Li, Q Kan, G Kang and X Zhang, Cyclic plasticity of an interstitial high-entropy alloy: Experiments, crystal plasticity modeling, and simulations, Journal of the Mechanics and Physics of Solids, https://doi.org/10.1016/j.jmps.2020.103971.

• M Pippig and F Mercuri, Efficient evaluation of Coulomb interactions in kinetic Monte Carlo simulations of charge transport, The Journal of Chemical Physics, https://doi.org/10.1063/5.0003258.

• PP Indurkar, S Baweja, R Perez, SP Joshi, Predicting textural variability effects in the anisotropic plasticity and stability of hexagonal metals: Application to magnesium and its alloys, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2020.102762.

• Z Wang, J Zhang, G Li, Z Xu, H Zhang, J Zhang, A Hartmaier, F Fang and T Sun, Anisotropy-Related Machining Characteristics in Ultra-Precision Diamond Cutting of Crystalline Copper, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-020-00060-9.

• G Sha, M Huang, MJS Lowe and SI Rokhlin, Attenuation and velocity of elastic waves in polycrystals with generally anisotropic grains: Analytic and numerical modeling, The Journal of the Acoustical Society of America, https://doi.org/10.1121/10.0001087.

• L Kuna, J Mangeri, EP Gorzkowski, JA Wollmershauser and S Nakhmanson, Mesoscale modeling of light transmission modulation in ceramics, Acta Materialia, https://doi.org/10.1016/j.actamat.2020.03.040.

• Z Wang, J Zhang, G Li, Z Xu, H Zhang, J Zhang, A Hartmaier, F Fang, Y Yan and T Sun, Anisotropy-Related Machining Characteristics in Ultra-Precision Diamond Cutting of Crystalline Copper, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-020-00060-9.

• H Li, H Ma, X Shi, H Zhang and JJK Daemen, A 3D Grain‐Based Model for Simulating the Micromechanical Behavior of Salt Rock, Rock Mechanics and Rock Engineering, https://doi.org/10.1007/s00603-020-02085-4.

• M Kasemer, E Zepeda-Alarcon, R Carson, P Dawson and H-R Wenk, Deformation heterogeneity and intragrain lattice misorientations in high strength contrast dual-phase bridgmanite/periclase, Acta Materialia, https://doi.org/10.1016/j.actamat.2020.02.061.

• A Ask, S Forest, B Appolaire and K Ammar, Microstructure evolution in deformed polycrystals predicted by a diffuse interface Cosserat approach, Advanced Modeling and Simulation in Engineering Sciences, https://doi.org/10.1186/s40323-020-00146-5.

• TF Fu, T Xu, MJ Heap, PG Meredith and TM Mitchell, Mesoscopic time-dependent behavior of rocks based on three-dimensional discrete element grain-based model, Computers and Geotechnics, vol. 121, pp. 103472, 2020.

• X Liang, C Robert, A Hor and F Morel, A numerical investigation of the high cycle fatigue sensitivity to microstructure and defect, International Journal of Fatigue, https://doi.org/10.1016/j.ijfatigue.2020.105541.

• XF Li, HB Li, LW Liu, YQ Liu, MH Ju and J Zhao, Investigating the crack initiation and propagation mechanism in brittle rocks using grain-based finite-discrete element method, International Journal of Rock Mechanics and Mining Sciences, https://doi.org/10.1016/j.ijrmms.2020.104219.

• R Ma and W Sun, FFT-based solver for higher-order and multi-phase-field fracture models applied to strongly anisotropic brittle materials, Computer Methods in Applied Mechanics and Engineering, vol. 362, pp. 112781, 2020.

• T Rousseau, Y Song, W Wang, S Rastogi, GZ Voyiadjis and JW Kysar, Order in polycrystalline plasticity deformation fields: Short-range intermittency and long-range persistency, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2020.102674.

• B Flipon, C Keller, R Quey and F Barbe, A full-field crystal-plasticity analysis of bimodal polycrystals, International Journal of Solids and Structures, vol. 184, pp. 178–192, 2020 (made cover of the Journal)

• KA Taylor, E Gjonaj and H de Gersem, Coupled Simulation of Current Flow and Residual Thermal Stress in ZnO Varistors, IEEE Transactions on Magnetics, vol. 56, pp. 7504504, 2020.

• D Wicht, M Schneider and T Bohlke, On Quasi‐Newton methods in FFT‐based micromechanics, International Journal for Numerical Methods in Engineering, https://doi.org/10.1002/nme.6283.

• M Marvi-Mashhadi, CS Lopes and J LLorca, High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams, Journal of the Mechanics and Physics of Solids, vol. 135, pp. 103814, 2020.

• S Luo, R Huang, L Zhu and H Yao, The formation of the Dabashan orocline, central China: Insights from high-resolution 3D crustal shear-wave velocity structure, Tectonophysics, https://doi.org/10.1016/j.tecto.2019.228244.

• S El Shawish, P-G Vuncent, H Moulinec, L Cizelj and L Gélébart, Full-field polycrystal plasticity simulations of neutron-irradiated austenitic stainless steel: A comparison between FE and FFT-based approaches, Journal of Nuclear Materials, https://doi.org/10.1016/j.jnucmat.2019.151927.

• M Jalili and B Soltani, Investigation the micromechanisms of strain localization formation in AZ31 Mg alloy: A mesoscale 3D full-field crystal plasticity computational homogenization study, European Journal of Mechanics - A/Solids, https://doi.org/10.1016/j.euromechsol.2019.103903.

• M Diehl, D Wang, C Liu, JR Mianroodi, F Hanb, D Ma, PJJ Kokg, F Roters and P Shanthraj, Solving material mechanics and multiphysics problems of metals with complex microstructures using DAMASK – The Düsseldorf Advanced Material Simulation Kit, Advanced Engineering Materials, https://doi.org/10.1002/adem.201901044.

• T Fischer, SU Kyzy, O Munz and E Werner, Microstructure-based modelling of rubbing in polycrystalline honeycomb structures, Continuum Mechanics and Thermodynamics, https://doi.org//10.1007/s00161-019-00852-5.

• K Chatterjee, RA Carson and P Dawson, Estimation of Errors in Stress Distributions Computed in Finite Element Simulations of Polycrystals, Integrating Materials and Manufacturing Innovation, https://doi.org/10.1007/s40192-019-00158-z.

• PMC Carneiro, PV Gamboa, C Baudin and AP Silva, Modelling of elastic modulus of a biphasic ceramic microstructure using 3D representative volume elements, Journal of the European Ceramic Society, https://doi.org/10.1016/j.jeurceramsoc.2019.10.046.

• SC Aduloju and TJ Truster, A primal formulation for imposing periodic boundary conditions on conforming and nonconforming meshes, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2019.112663.

• C Kurniawan, S Baird, DT Fullwood, ER Homer and OK Johnson, Grain boundary structure–property model inference using polycrystals: the overdetermined case, Journal of Materials Science, https://doi.org/10.1007/s10853-019-04125-z.

• M Kasemer and P Dawson, A finite element methodology to incorporate kinematic activation of discrete deformation twins in a crystal plasticity framework, Computer Methods in Applied Mechanics and Engineering, vol. 358, pp. 112653, 2020.

• D Wicht, M Schneider and T Bohlke, An efficient solution scheme for small-strain crystal-elasto-viscoplasticity in a dual framework, Computer Methods in Applied Mechanics and Engineering, vol. 358, pp. 112611, 2020.

2019

• K Frydrych and K Kowalczyk-Gajewska, Grain refinement in the equal channel angular pressing process: simulations using the crystal plasticity finite element method, Modelling and Simulation in Materials Science and Engineering, vol. 26, pp. 065015, 2018.

• Y Charles, HT Nguyen, K Ardon and M Gasperini, chapter Scale Transition in Finite Element Simulations of Hydrogen–Plasticity Interactions in Mechanics and Physics of Solids at Micro‐ and Nano‐Scales, book edited by Wiley, 2019.

• Y Zhang, G Xiao, C Xu, T Zhou, M Yi and Z Chen, Cohesive Element Model for Fracture Behavior Analysis of Al2O3/Graphene Composite Ceramic Tool Material, Crystals, vol. 9, pp. 669, 2019.

• R Ma and TJ Truster, * Combined crystal plasticity and grain boundary modeling of creep in Ferritic-Martensitic Steels, part 1: Theory and implementation*, Modelling and Simulation in Materials Science and Engineering, vol. 27, pp. 075009, 2019.

• E Raghami, C Schrank and JH Kruhl, 3D modelling of the effect of thermal-elastic stress on grain-boundary opening in quartz grain aggregates, Tectonophysics, https://doi.org/10.1016/j.tecto.2019.228242.

• W Zhang, X Wang, Y Wang, X Yu, Y Gao and Z Feng, Type IV Failure in Weldment of Creep Resistant Ferritic Alloys: I Micromechanical Origin of Creep Strain Localization in the Heat Affected Zone, Journal of the Mechanics and Physics of Solids, https://doi.org/10.1016/j.jmps.2019.103774.

• S Dhala, S Mishra, A Tewari and A Alankar, Modeling of finite deformation of pseudoelastic NiTi shape memory alloy considering various inelasticity mechanisms, International Journal of Plasticity, vol. 115, pp. 216-237, 2019.

• X Gao, X Zhang and A Li, Numerical Study on Mechanical Properties of Quasi-Continuous SiCp/Al Network Composites with Various Particle Size Ratios (PSRs), International Journal of Applied Mechanics, vol. 11, pp. 1950065, 2019.

• N Guo, CY Sun, YF Zhang and MW Fu, Analysis of size dependent earing evolution in micro deep drawing of TWIP steel by using crystal plasticity modeling, International Journal of Mechanical Sciences, https://doi.org/10.1016/j.ijmecsci.2019.105200.

• TMJ Gebhart, D Jehnichen, R Koschichow, M Muller, M Gobel, V Geske, M Stegelmann and M Gude, Multi-scale modelling approach to homogenise the mechanical properties of polymeric closed-cell bead foams, International Journal of Engineering Science, vol. 145, pp. 103168, 2019.

• H Li, J Yang, Y Han, C Yang, JJK Daemen and P Li, Weibull grain-based model (W-GBM) for simulating heterogeneous mechanical characteristics of salt rock, Engineering Analysis with Boundary Elements, vol. 108, pp. 227-243, 2019.

• H Li, C Yang, X Ding, NT William, H Yin and S Zhang, Weibull linear parallel bond model (WLPBM) for simulating micro-mechanical characteristics of heterogeneous rocks, Engineering Analysis with Boundary Elements, vol. 108, pp. 82-94, 2019.

• M Maghsoudi-Ganjeh, L Lin, X Wang, X Wang and X Zeng, Computational Modeling of the Mechanical Behavior of 3D Hybrid Organic–Inorganic Nanocomposites, JOM, https://doi.org/10.1007/s11837-019-03737-9.

• I Benedetti, V Gulizzi and A Milazzo, A microstructural model for homogenisation and cracking of piezoelectric polycrystals, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2019.112595.

• Y Charles, M Gasperini, N Fagnon, K Ardon and A Duhamel, Finite element simulation of hydrogen transport during plastic bulging of iron submitted to gaseous hydrogen pressure, Engineering Fracture Mechanics, https://doi.org/10.1016/j.engfracmech.2019.106580.

• I Kalyan and CV Krishnamurthy, Effects of polycrystalline birefringent grains on the morphology dependent resonance modes of a spherical resonator, Journal of Applied Physics, vol. 126, pp. 053102, 2019.

• M Ghodrati, M Ahmadian and R Mirzaeifa, Three-Dimensional Study of Rolling Contact Fatigue Using Crystal Plasticityand Cohesive Zone Method, International Journal of Fatigue, https://doi.org/10.1016/j.ijfatigue.2019.105208.

• B Engel, L Mäde, P Lion, N Moch, H Gottschalk and T Beck, Probabilistic Modeling of Slip System-Based Shear Stresses and Fatigue Behavior of Coarse-Grained Ni-Base Superalloy Considering Local Grain Anisotropy and Grain Orientation, Metals, vol. 9, pp. 813, 2019.

• T Yalçinkaya, I Ozdemir and A0 Firat, Inter-granular cracking through strain gradient crystal plasticity and cohesive zone modeling approaches, Theoretical and Applied Fracture Mechanics, https://doi.org/10.1016/j.tafmec.2019.102306.

• H Kanso, R Patte and D Ledue, Antiferromagnetic thickness and temperature dependence of the exchange bias properties of Co/IrMn nanodots and continuous films: A Monte Carlo study, Journal of Magnetism and Magnetic Materials, vol. 491, pp. 165543, 2019.

• F Benmessaoud, V Velay M Cheikh, V Vidal, C Boher and F Rézaï-Aria, Multi-Scale Numerical Analysis of the Effect of Microstructural Features on the Mechanical Behavior of Polycrystalline Ti-6Al-4V Alloy, Engineering Transactions, https://doi.org/10.24423/EngTrans.1014.20190615.

• M Marino, B Hudobivnik and P Wriggers, Computational homogenization of polycrystalline materials with the Virtual Element Method, Computer Methods in Applied Mechanics and Engineering, vol. 335, pp./ 349-372, 2019.

• M Yaghoobi, S Ganesan, S Sundar, A Lakshmaman, S Rudraraju, JE Allison and V Sundararaghavan, PRISMS-Plasticity: An open-source crystal plasticity finite element software, Computational Materials Science, vol. 169, pp. 109078, 2019.

• AC Poshadel and P Dawson, Role of Anisotropic Strength and Stiffness in Governing the Initiation and Propagation of Yielding in Polycrystalline Solids, Metallurgical and Materials Transactions A, vol. 50, pp. 1185-1201, 2019.

• AC Poshadel, MA Gharghouri and P Dawson, Initiation and Propagation of Plastic Yielding in Duplex Stainless Steel, Metallurgical and Materials Transactions A, vol. 50, pp. 1202-1230, 2019.

• AC Poshadel, MA Gharghouri and P Dawson, Sensitivity of crystal stress distributions to the definition of virtual two-phase samples, Metallurgical and Materials Transactions A, vol. 50, pp. 1231-1249, 2019.

• A Vijay and F Sadeghi, A continuum damage mechanics framework for modeling the effect of crystalline anisotropy on rolling contact fatigue, Tribology International, https://doi.org/10.1016/j.triboint.2019.105845.

• RR Tenreiro Vieira, Dde Bortoli, MVieira de Carvalho and FM Andrade Pires, The role of elastic anisotropy on the macroscopic constitutive response and yield onset of cubic oligo- and polycrystals, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2019.06.007.

• K Frydrych, K Kowalczyk-Gajewska and A Prakash, On solution mapping and remeshing in crystal plasticity finite element simulations: Application to equal channel angular pressing, Modelling and Simulation in Materials Science and Engineering, https://doi.org/10.1088/1361-651X/ab28e3.

• S Shivaprasad, C V Krishnamurthy, A Pandala, A Saini, A Ramachandran and K Balasubramaniam, Numerical Modelling Methods for Ultrasonic Wave Propagation Through Polycrystalline Materials, Transactions of the Indian Institute of Metals, https://doi.org/10.1007/s12666-019-01739-4.

• A Biswas, MRG Prasad, N Vajragupta, H ul Hassan, F Brenne, T Niendorf and A Hartmaier, Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic Components, Advanced Engineering Materials, https://doi.org/10.1002/adem.201900275.

• L Kuna, J Mangeri, EP Gorzkowski, JA Wollmershauser and S Nakhmanson, Mesoscale modeling of polycrystalline light transmission, Acta Materialia, https://doi.org/10.1016/j.actamat.2019.06.001.

• Q Xu, J Tu and Z Lu, Development of the FE In-House Procedure for Creep Damage Simulation at Grain Boundary Level, Metals, vol. 9, pp. 656.

• L Koschmieder, S Hojda, M Apel, R Altenfeld, Y Bami, C Haase, M Lin, A Vuppala, G Hirt and GJ Schmitz, AixViPMaP - an Operational Platform for Microstructure Modeling Workflows, Integrating Materials and Manufacturing Innovation, https://doi.org/10.1007/s40192-019-00138-3.

• B Pulatsu, E Erdogmus, PB Lourenco and R Quey, Simulation of uniaxial tensile behavior of quasi-brittle materials using softening contact models in DEM, International Journal of Fracture, https://doi.org/10.1007/s10704-019-00373-x.

• L Hu, S-y Jiang, L-X Shi and Y-Q Zhang, Prediction of grain scale plasticity of NiTi shape memory alloy based on crystal plasticity finite element method, Transactions of Nonferrous Metals Society of China, vol. 29, pp. 775-784, 2019.

• T Kawamori, Q Ru and KL Vodopyanov, Comprehensive Model for Randomly Phase-Matched Frequency Conversion in Zinc-Blende Polycrystals and Experimental Results for ZnSe, Physical Review Applied, vol. 11, pp. 054015, 2019.

• L Filipovic, A method for simulating the influence of grain boundaries and material interfaces on electromigration, Microelectronics Reliability, vol. 97, pp. 38-52, 2019.

• K Balusu, R Kelton, EI Meletis and H Huang, Investigating the relationship between grain orientation and surface height changes in nickel polycrystals under tensile plastic deformation, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2019.04.011.

• HS Abdullahi, Y Liang and S Gao, Predicting the elastic properties of closed-cell aluminum foams: a mesoscopic geometric modeling approach, SN Applied Sciences, https://doi.org/10.1007/s42452-019-0382-y.

• Y Liu, A Van Pamel, PB Nagy and P Cawley, Investigation of ultrasonic backscatter using three-dimensional finite element simulations, The Journal of the Acoustical Society of America, vol. 145, pp..1584, 2019.

• R Ma and TJ Truster, FFT-based homogenization of hypoelastic plasticity at finite strains, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2019.02.037.

• B Zhang, M Dodaran, S Ahmed, S Shao, WJ Meng, KJ Juul and KL Nielsen, Grain-size affected mechanical response and deformation behavior in microscale reverse extrusion, Materialia, https://doi.org/10.1016/j.mtla.2019.100272.

• XF Li, HB Li and J Zhao, The role of transgranular capability in grain-based modelling of crystalline rocks, Computers and Geotechnics, vol. 110, pp. 161-183, 2019.

• H Zhang, A Jérusalem, E Salvati, C Papadaki, KS Fong, X Song and AM Morsunsky, Multi-scale mechanisms of Twinning-detwinning in magnesium AZ31B alloy simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2019.02.018.

• X Gao, X Zhang, M Qian and L Geng, Effect of reinforcement shape on fracture behaviour of SiC/Al composites with network architecture, Composite Structures, https://doi.org/10.1016/j.compstruct.2019.02.067.

• H Kanso, R Patte, V Baltz and D Ledue, Influence of finite-size and edge effects on the exchange-bias properties of ferromagnetic/antiferromagnetic nanodots: Granular Monte Carlo investigation, Physical Review B, https://doi.org/10.1103/physrevb.99.054410.

• R Carson and P Dawson, Formulation and Characterization of a Continuous Crystal Lattice Orientation Finite Element Method (LOFEM) and its Application to Dislocation Fields, Journal of the Mechanics and Physics of Solids, https://doi.org/10.1016/j.jmps.2019.02.006.

• R Berthelsen and A Menzel, Computational homogenisation of thermo-viscoplastic composites: Large strain formulation and weak micro-periodicity, Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2018.12.032.

• X Wang and M Cai, A comprehensive parametric study of grain-based models for rock failure process simulation, International Journal of Rock Mechanics and Mining Sciences, vol. 115, pp. 60-76, 2019.

• LF Orozco, J-Y Delenne, P Sornay and F Radjai, Discrete-element model for dynamic fracture of a single particle, International Journal of Solids and Structures, https://doi.org/10.1016/j.ijsolstr.2019.01.033.

• X Xiao, L Chen, L Yy and H Duan, Modelling nano-indentation of ion-irradiated FCC single crystals by strain-gradient crystal plasticity theory, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2019.01.005.

• D Liu, T Ma, W Lichen, Y Liu, T Zhao, F-X Hu, J Sun and B Shan, Computational analysis of microstructure-coercivity relation in multi-main-phase Nd-Ce-Fe-B magnets, Journal of Physics D: Applied Physics, https://doi.org/10.1088/1361-6463/aaff42.

• N Zhao, A Roy, W Wang, L Zhao and VV Silberschmidt, Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2019.01.006.

• X Gao, X Zhang and L Geng, Strengthening and fracture behaviors in SiCp/Al composites with network particle distribution architecture, Materials Science and Engineering: A, vol. 740-741, pp..353–362, 2019.

• G Grabowski, Modelling of thermal expansion of single- and two-phase ceramic polycrystals utilising synthetic 3D microstructures, Computational Materials Science, vol. 156, pp. 7–16, 2019.

• D Zhu, S Tu, H Ma, H Wei, H Li and C Wang, Modeling and calculating for the compaction characteristics of waste rock masses, International Journal for Numerical and Analytical Methods in Geomechanics, vol. 43, pp. 257-271, 2019.

• S Yang, J Dirrenberger, E Monteiro and N Ranc, Representative volume element size determination for viscoplastic properties in polycrystalline materials, International Journal of Solids and Structures, vol. 158, pp. 210-219, 2019.

• K Zhang, B Holmedal, T Manik and A Saai, Assessment of advanced Taylor models, the Taylor factor and yieldsurface exponent for FCC metals, International Journal of Plasticity, vol. 114, pp. 144-160, 2019.

• L Hu, S Jiang, J Tu and Z Zhou, Subgrain Effect on Grain Scale Plasticity of NiTi Shape Memory Alloy Under Canning Compression: A Crystal Plasticity Finite Element Analysis, Metals and Materials International, vol. 25, pp. 333-342, 2019.

• JV Kobylinski, R Lawitzki, M Hofmann, C Krempaszky and E Werner, Micromechanical behaviour of Ni-based superalloys close to the yield point: a comparative study between neutron diffraction on different polycrystalline microstructures and crystal plasticity finite element modelling, Continuum Mechanics and Thermodynamics, vol. 31, pp. 691-702, 2019.

2018

• PR Dawson, DE Boyce, J-S Park, E Wielewski and MP Miller, Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions, Acta Materialia, vol. 144, pp. 92-106, 2018.

• TJ Truster, DEIP, discontinuous element insertion Program — Mesh generation for interfacial finite element modeling, SoftwareX, vol. 7, pp. 162–170, 2018.

• B Flipon, L Milhem, C Keller, R Quey, F Barbe, Modelling of polycrystals using well-controlled Voronoi-type tessellations and its applications to micromechanical analyses, Physics and Mechanics of Random Media: from Morphology to Material Properties, F Willot and S Forest (Eds), Presse des Mines, Paris, France, ch 23, pp. 187-198, 2018.

• M Montanari and N Petrinic, OpenGJK for C, C# and Matlab: Reliable solutions to distance queries between convex bodies in three-dimensional space, SoftwareX, pp. 352-355, vol. 7, 2018.

• X Zhang, Y Mu, M Dodaran, S Shao, D Moldovan and WJ Meng, Mechanical failure of CrN/Cu/CrN interfacial regions under tensile loading, Acta Materialia, vol. 160, pp. 1-13, 2018.

• B Barzdajn, AT Paxton, D Stewart, FPE Dunne, A Crystal Plasticity Assessment of Normally-loaded Sliding Contact in Rough Surfaces and Galling, Journal of the Mechanics and Physics of Solids, vol. 121, pp. 517-542, 2018.

• S Chandra, MK Samal, R Kapoor, N Naveen Kumar, VM Chavan and S Raghunathan, Deformation behavior of Nickel-based superalloy Su-263: Experimental characterization and crystal plasticity finite element modeling, Materials Science and Engineering: A, vol. 735, pp. 19-30, 2018.

• R Quey, A Villani and C Maurice, Nearly uniform sampling of crystal orientations, Journal of Applied Crystallography, vol. 51, pp. 1162-1173, 2018.

• K Chatterjee, MP Echlin, M Kasemer, PG Callahan, TM Pollock and P Dawson, Prediction of tensile stiffness and strength of Ti-6Al-4V using instantiated volume elements and crystal plasticity, Acta Materialia, vol. 157, pp. 21-32, 2018.

• A Abdelaziz, Q Zhao and G Grasselli, Grain based modelling of rocks using the combined finite-discrete element method, Computers and Geotechnics, vol. 103, pp. 73-81, 2018.

• M Marvi-Mashhadi, CS Lopez and J LLorca, Effect of anisotropy on the mechanical properties of polyurethane foams: an experimental and numerical study, Mechanics of Materials, vol. 124, pp. 143-154, 2018.

• N Zhao, W Wang and Y Liu, Intergranular mechanical behavior in a blade groove-like component by crystal plasticity model with cohesive zone model, Engineering Fracture Mechanics, vol. 201, pp. 196-213, 2018.

• B Hudobivnik, F Aldakheel and P Wriggers, A low order 3D virtual element formulation for finite elasto–plastic deformations, Computational Mechanics, https://doi.org/10.1007/s00466-018-1593-6.

• AA El-Aty, Y Xu, S Ha and S-H Zhang, Computational homogenization of tensile deformation behaviors of a third generation Al-Li alloy 2060-T8 using crystal plasticity finite element method, Materials Science and Engineering: A, vol. 731, pp. 583-594, 2018.

• Z Feng, H Li, J Yang, H Huang, G Li and D Huang, Macro-meso scale modeling and simulation of surface roughening: Aluminum alloy tube bending, International Journal of Mechanical Sciences, https://doi.org/10.1016/j.ijmecsci.2018.06.032.

• I Benedetti and V Gulizzi, A grain-scale model for high-cycle fatigue degradation in polycrystalline materials, International Journal of Fatigue, pp. 90-105, vol. 116, 2018.

• X Wang and M Cai, Modeling of brittle rock failure considering inter- and intra-grain contact failures, Computers and Geotechnics, vol. 101, pp. 224-244, 2018.

• D de Bortoli, F Adziman, EA de Souza Neto and FM Andrade Pires, Constitutive modelling of mechanically induced martensitic transformations: Prediction of transformation surfaces, Engineering Computations, vol. 35, pp. 772-799, https://doi.org/10.1108/EC-03-2017-0087.

• I Benedetti, A Cohesive-frictional Grain-boundary Technique for Microstructural Analysis of Polycrystalline Materials, Advances in Computational Coupling and Contact Mechanics, https://doi.org/10.1142/9781786344786_0009.

• I Gribanov, R Taylor and R Sarracino, Cohesive zone micromechanical model for compressive and tensile failure of polycrystalline ice, Engineering Fracture Mechanics, https://doi.org/10.1016/j.engfracmech.2018.04.023.

• M Ghodrati, M Ahmadian and R Mirzaeifar, Modeling of Rolling Contact Fatigue in Rails at the Microstructural Level, Wear, https://doi.org/10.1016/j.wear.2018.04.016.

• A Van Pamel, G Sha, MJS Lowe and SI Rokhin, Numerical and analytic modelling of elastodynamic scattering within polycrystalline materials, The Journal of the Acoustical Society of America, vol. 143, pp. 2394, 2018.

• I Gribanov, R Taylor and R Sarracino, Parallel implementation of implicit finite element model with cohesive zones and collision response using CUDA, International Journal for Numerical Methods in Engineering, https://doi.org/10.1002/nme.5825.

• M Bouchedjra, T Kanit, C Boulemia, A Amrouche and MEA Belouchrani, Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria, European Journal of Mechanics - A/Solids, https://doi.org/10.1016/j.euromechsol.2018.04.011.

• E Alabort, D Barba, S Sulzer, M Libner, N Petrinic and RC Reed, Grain boundary properties of a nickel-based superalloy: characterisation and modelling, Acta Materialia, https://doi.org/10.1016/j.actamat.2018.03.059.

• H Yuan, W Zhang, GM Castelluccio, J Kim and Y Liu, Microstructure-sensitive Estimation of Small Fatigue Crack Growth in Bridge Steel Welds, International Journal of Fatigue, https://doi.org/10.1016/j.ijfatigue.2018.03.015.

• Y Liu, Y Zhu, C Oskay, P Hu, L Ying and D Wang, Experimental and Computational Study of Microstructural Effect on Ductile Fracture of Hot-Forming Materials, Materials Science and Engineering: A, https://doi.org/10.1016/j.msea.2018.03.049.

• J Fischbacher, A Kovacs, M Gusenbauer, H Oezelt, L Exl, S Bance and T Schrefl, Micromagnetics of rare-earth efficient permanent magnets, Journal of Physics D: Applied Physics, https://doi.org/10.1088/1361-6463/aab7d1.

• SI Ranganathan, MR Murshed and L Costa, Heterogeneous Anisotropy Index and scaling in two-phase random polycrystals, Acta Mechanica, https://doi.org/10.1007/s00707-018-2114-6.

• A Vidyasagar, AD Tutcuoglu and DM Kochmann, Deformation patterning in finite-strain crystal plasticity by spectral homogenization with application to magnesium, Computer Methods in Applied Mechanics and Engineering, accepted.

• M Madivala, A Schwedt, SL Wong, F Roters, U Prahl and W Bleck, Temperature dependent strain hardening and fracture behavior of TWIP steel, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2018.02.001.

• O Johnson and C Kurniawan, An efficient algorithm for generating diverse microstructure sets and delineating properties closures, Acta Materialia, vol. 147, pp. 313-321, 2018.

• C Müller, T Frühwirt, D Haase, R Schlegel and H Konietzky, Modeling deformation and damage of rock salt using the discrete element method, International Journal of Rock Mechanics and Mining Sciences, vol. 103, pp. 230-241, 2018.

• D Barba, E Alabort, D Garcia-Gonzalez, JJ Moverare, RC Reed and A Jérusalem, A thermodynamically consistent constitutive model for diffusion-assisted plasticity in Ni-based superalloys, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2017.12.007.

• M Ryzy, T Grabec, P Sedlak and IA Veres, Influence of grain morphology on ultrasonic wave attenuation in polycrystalline media with statistically equiaxed grains, The Journal of the Acoustical Society of America, vol. 143, pp. 219-229, 2018.

• R Quey and L Renversade, Optimal polyhedral description of 3D polycrystals: method and application to statistical and synchrotron X-ray diffraction data, Computer Methods in Applied Mechanics and Engineering, vol. 330, pp. 308-333, 2018.

• P Liu, H Xu, D Wang, C Wang, C Schulze and M Oeser, Comparison of mechanical responses of asphalt mixtures manufactured by different compaction methods, Construction and Building Materials, vol. 162, pp. 765-780, 2018.

• I Benedetti, V Gulizzi and A Milazzo, Grain-boundary modelling of hydrogen assisted intergranular stress corrosion cracking, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2017.11.001.

• M Ekh, N Larijani, E Dartfeldt, M Kapp and R Pippan, Prediction of the mechanical behaviour of pearlitic steel based on microcompression tests, micromechanical models and homogenization approaches, European Journal of Mechanics - A/Solids, vol. 67, pp. 272-279, 2018.

• J Liu, L Li, G Dirras, K Ameyama, F Cazes and M Ota, A three-dimensional multi-scale polycrystalline plasticity model coupled with damage for pure Ti with harmonic structure design, International Journal of Plasticity, vol. 100, 192-207, 2018.

• G Zhang, GA Gazonas and F Bobaru, Supershear damage propagation and sub-Rayleigh crack growth from edge-on impact: a peridynamic analysis, International Journal of Impact Engineering, https://doi.org/10.1016/j.ijimpeng.2017.11.010.

2017

• X Zhang and C Oskay, Material and morphology parameter sensitivity analysis in particulate composite materials, Computational Mechanics, https://doi.org/10.1007/s00466-017-1512-2.

• B Xi, G Fang and S Xu, Multiscale mechanical behavior and microstructure evolution of extruded magnesium alloy sheets: Experimental and crystal plasticity analysis, Materials Characterization, https://doi.org/10.1016/j.matchar.2017.11.034.

• L Hu, S Jiang, Y Zhang and D Sun, Crystal Plasticity Finite Element Simulation of NiTi Shape Memory Alloy Based on Representative Volume Element, Metals and Materials International, vol. 23, pp. 1075-1086, 2017.

• J Fischbacher, A Kovacs, H Oezelt, M Gusenbauer, D Suess and T Schrefl, Effective uniaxial anisotropy in easy-plane materials through nanostructuring, Applied Physics Letters, https://doi.org/10.1063/1.4997816.

• S Chandra, MK Samal, VM Chavan and S Raghunathan, Hierarchical multiscale modeling of plasticity in copper: From single crystals to polycrystalline aggregates, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2017.10.014.

• S Rescka, L Munk, P Wriggers and HJ Maier, An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal-Plasticity Model, Journal of Materials Eigineering and Performance, https://doi.org/10.1007/s11665-017-3046-3.

• Y Morris Wang, T Voisin, JT McKeown, J Ye, NP Calta, Z Li, Z Zeng, Y Zhang, W Chen, T Tran Roehling, RT Ott, MK Santala, PJ Depond, MJ Matthews, AV Hamza and T Zhun, Additively manufactured hierarchical stainless steels with high strength and ductility, Nature Materials, https://doi.org/10.1038/NMAT5021.

• H Li, J Li, B Tang, J Fan and H Yuan, Simulation of intergranular ductile cracking in beta titanium alloys based on a micro-mechanical damage model, Materials, vol. 10, pp. 1250, 2017.

• L Hu, S Jiang, T Zhou, J Ti, L Shi, Q Chen and M Yang, Multiscale Modeling of Polycrystalline NiTi Shape Memory Alloy under Various Plastic Deformation Conditions by Coupling Microstructure Evolution and Macroscopic Mechanical Response, Materials, vol. 10, pp. 1172, 2017.

• L Hu, S Jiang, Y Zhang, X Zhu and D Sun, Influence of slip system combination models on crystal plasticity finite element simulation of NiTi shape memory alloy undergoing uniaxial compression, Progress in Natural Science: Materials International, https://doi.org/10.1016/j.pnsc.2017.08.017.

• M Khadyko, CD Marioara, S Dumoulin, T Borvik and OS Hopperstad, Effects of heat-treatment on the plastic anisotropy of extruded aluminium AA6063, Materials Science and Engineering A, vol. 708, pp. 208-221, 2017.

• Y Ayed, C Robert, G Germain and A Ammar, Orthogonal micro-cutting modeling of the Ti17 titanium alloy using the crystal plasticity theory, Finite Elements in Analysis and Design, vol. 137, pp. 43-55, 2017.

• A Vijay, N Paulson and F Sadeghi, A 3D Finite Element Modelling of Crystalline Anisotropy in Rolling Contact Fatigue, International Journal of Fatigue, https://doi.org/10.1016/j.ijfatigue.2017.09.016.

• M Sledzinska, R Quey, B Mortazavi, B Graczykowski, M Placidi, D Saleta Reig, D Navarro Urrios, F Alzina, L Colombo, S Roche and CM Sotomayor Torres, Record Low Thermal Conductivity of Polycrystalline MoS2 films: Tuning the Thermal Conductivity by Grain Orientation, ACS Applied Materials & Interfaces, vol. 9, pp. 37905-37911, 2017.

• NY Juul, J Oddershede, A Beaudoin, K Chatterjee, MKA Koker, D Dale, P Shade and G Winther, Measured resolved shear stresses and Bishop-Hill stress states in individual grains of austenitic stainless steel, Acta Materialia, https://doi.org/10.1016/j.actamat.2017.09.021.

• N Guo, C Sun, M Fu and M Han, Misorientation-Dependent Twinning Induced Hardening and Texture Evolution of TWIP Steel Sheet in Plastic Deformation Process, Metals, pp. 348, vol. 7, 2017.

• J Zhao, L Lv, G Liu and K Wang, Analysis of deformation inhomogeneity and slip mode of TA15 titanium alloy sheets during the hot tensile process based on crystal plasticity model, Materials Science and Engineering A, https://doi.org/10.1016/j.msea.2017.08.094, 2017.

• O Barrera, A Cocks and A Ponter, Advances in Direct Methods for Materials and Structures, Springer, ISBN : 3319598104, 9783319598109, 217 pages, 2017.

• D Magisano, E Charkaluk, G de Saxcé and T Kanit, Shakedown Within Polycrystals: A Direct Numerical Assessment, Advances in Direct Methods for Materials and Structure, pp. 29-50, 2017.

• K Chatterjee, JYP Ko, JT Weiss, HT Philipp, J Becker, P Purohit, S.M Gruner and A.J Beaudoin, Study of residual stresses in Ti-7Al using theory and experiments, Journal of the Mechanics and Physics of Solids, vol. 109, pp. 95-116, 2017.

• H Yuan, W Zhang, J Kim and Y Liu, A Nonlinear Grain-based Fatigue Damage Model for Civil Infrastructure under Variable Amplitude Loads, International Journal of Fatigue, https://doi.org/10.1016/j.ijfatigue.2017.07.026, 2017.

• E Guyon, JY Delenne and F Radjai, Matière en grains, book edited by Odile Jacob, ISBN : 978-2-7381-3709-8, 2017.

• M Kasemer, MP Echlin, JC Stinville, TM Pollock and P Dawson, On slip initiation in equiaxed alpha/beta Ti-6Al-4V, Acta Materialia, https://doi.org/10.1016/j.actamat.2017.06.059, 2017.

• Y Charles, HT Nguyen and M Gaspérini, Comparison of hydrogen transport through pre-deformed synthetic polycrystals and homogeneous samples by finite element analysis, International Journal of Hydrogen Energy, https://doi.org/10.1016/j.ijhydene.2017.06.016, 2017.

• S El Shawish and L Cizelj, Combining Single- and Poly-Crystalline Measurements for Identification of Crystal Plasticity Parameters: Application to Austenitic Stainless Steel, Crystals, vol. 7, https://doi.org/10.3390/cryst7060181, 2017.

• PJ Zhao, ZH Chen and CF Dong, Investigation and prediction of tearing failure during extrusion based on a modified shear damage model, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2017.05.008, 2017.

• S Natarajan, ET Ooi, A Saputra and C Song, A scaled boundary finite element formulation over arbitrary faceted star convex polyhedra, Engineering Analysis with Boundary Elements, pp. 218-229, vol. 80, 2017.

• R Carson, M Obstalecki, M Miller and P Dawson, Characterizing Heterogeneous Intragranular Deformations in Polycrystalline Solids Using Diffraction-Based and Mechanics-Based Metrics, Modelling and Simulation in Materials Science and Engineering, vol. 25, pp. 055008, 2017 (made cover of the Journal)

• J Fischbacher, A Kovacs, H Oezelt, T Schrefl, L Exl, J Fidler, D Suess, N Sakuma, M Yano, A Kato, T Shoji, and A Manabe, Nonlinear conjugate gradient methods in micromagnetics, AIP Advances, vol. 7, pp. 045310, 2017.

• M Petersmann, T Antretter, T Waitz and FD Fischer, A new approach predicting the evolution of laminated nanostructures–martensite in NiTi as an example, Modelling and Simulation in Materials Science and Engineering, vol. 25, pp. 035004, 2017.

• E Ma and T Zhu, Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals, Materials Today, vol. 7, pp. 67–76, 2017.

• M Kasemer, R Quey and P Dawson, The Influence of Mechanical Constraints Introduced by beta Annealed Microstructures on the Yield Strength and Ductility of Ti-6Al-4V, Journal of the Mechanics and Physics of Solids, accepted.

• VP Nguyen, CT Nguyen, T Rabczuk and S Natarajan, On a family of convected particle domain interpolations in the material point method, Finite Elements in Analysis and Design, vol. 126, pp. 50-64, 2017.

• L Zhang, W Xu, C Liu, X Ma and J Long, Quantitative analysis of surface roughness evolution in FCC polycrystalline metal during uniaxial tension, Computational Materials Science, vol. 132, pp. 19-29, 2017.

• Z Wang and P Li, Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina, Ceramics International, https://doi.org/10.1016/j.ceramint.2017.02.121, 2017.

• MR Kabir and H Richter, Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy, Materials, vol. 10, p 35, 2017.

• B Mortazavi, R Quey, H Ostadhossein, A Villani, N Moulin, A.C.T Van Duin, and T Rabczuk, Strong thermal transport along polycrystalline transition metal dichalcogenides revealed by multiscale modelling for MoS2, Applied Materials Today, vol. 7, pp. 67-76, 2017.

• MR Murshed and SI Ranganathan, Hill-Mandel condition and bounds on lower symmetry elastic crystals, Mechanics Research Communications, vol. 81, pp. 7-10, 2017.

• E Wielewski, DE Boyce, J-S Park, MP Miller and PR Dawson, A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics, Acta Materialia, vol. 126, pp. 469-480, 2017.

• MR Murshed and SI Ranganathan, Scaling laws in elastic polycrystals with individual grains belonging to any crystal class, Acta Mechanica, https://doi.org/10.1007/s00707-016-1774-3.

• H Oezelt, E Kirk, P Wohlhuter, E Muller, LJ Heyderman, A Kovacs and T Schrefl, Vortex motion in amorphous ferrimagnetic thin film elements, AIP Advances, vol. 7, 056001, 2017.

• S Gupta, AJ Beaudoin and J Chevy, Strain rate jump induced negative strain rate sensitivity (NSRS) in aluminum alloy 2024: Experiments and constitutive modeling, Materials Science and Engineering A, vol. 683, pp. 143-152, 2017.

• Y Lv, H Li, X Zhu and W Liu, Discrete element method simulation of random grain-based models, Cluster Computing, https://doi.org/10.1007/s10586-016-0705-3.

• CH Pham, S Thuillier and P-Y Manach, Prediction of flow stress and surface roughness of stainless steel sheets considering an inhomogeneous microstructure, Materials Science & Engineering A, vol. 678, pp. 377-388, 2017.

• M Toifl, P Hartlieb, R Meisels, T Antretter and F Kuchar, Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite, Minerals Engineering, vol. 103-104, pp. 78-92, 2017.

• F Adzima, T Balan, PY Manach, N Bonnet and L Tabourot, Crystal plasticity and phenomenological approaches for the simulation of deformation behavior in thin copper alloy sheets, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2016.06.003.

2016

• TJ Truster, On interface element insertion into three-dimensional meshes, Engineering Fracture Mechanics, vol. 153, pp. 171–174, 2016.

• A Van Pamel, G Sha, SI Rokhlin and MJS Lowe, Finite element modelling of elastic wave propagation and scaterring within heterogeneous media, Mathematical, Physical and Engineering Sciences, vol. 473, 20160738, 2016.

• G Lhoutellier, D Ledue, R Patte and V Baltz, Monte Carlo investigation of how interfacial magnetic couplings affect blocking temperature distributions in exchange bias bilayers, Jounal of Applied Physics, vol. 120, pp. 193902, 2016.

• A Zouaghi, V Velay, A Soveja, T Pottier, M Cheikh and F Rézai-Aria, A multi-scale approach to investigate the non linear subsurface behavior and strain localization of X38CrMoV5-1 martensitic tool steel: experiment and numerical analysis, International Journal of Plasticity, vol. 87, pp. 130-153, 2016.

• S Beese, S Loehnert and P Wriggers, Modeling of Fracture in Polycrystalline Materials, Chapter in Advances in Discretization Methods, SEMA SIMAI Springer Series.

• M Sledzinska, B Graczykowski, M Placidi, D Saleta Reig, A El Sachat, J.S Reparaz, F Alzina, B Mortazavi, R Quey, L Colombo, S Roche and C.M Sotomayor Torres, Thermal conductivity of MoS2 polycrystalline nanomembranes, 2D Materials, vol. 3, p 035016, 2016.

• D Cantor, E Azéma, P Sonnay and F Radjai, Three-dimensional bonded-cell model for grain fragmentation, Computational Particle Mechanics, https://doi.org/10.1007/s40571-016-0129-0.

• M Khadyko, S Dumoulin and OS Hopperstad, Texture gradients and strain localisation in extruded aluminium profile, International Journal of Solids and Structures, vol. 97-98, pp. 239-255, 2016.

• H Liu, Y Shen, J Ma, P Zheng and L Zhang, Grain Size Dependence of Uniform Elongation in Single-Phase FCC/BCC Metals, Journal of Materials Engineering and Performance, 25: 3599, 2016.

• I Benedetti, V Gulizzi and V Mallardo, A grain boundary formulation for crystal plasticity, International Journal of Plasticity, vol. 83, pp. 202-224, 2016.

• X Wei, C Dong, Z Chen K Xiao and X Li, The effect of hydrogen on the evolution of intergranular cracking: a cross-scale study using first-principles and cohesive finite element methods, RSC Advances, vol. 6, pp. 27282-27292, 2016.

• T Sadowski and B Pankowski, Numerical Modelling of Two-phase Ceramic Composite Response under Uniaxial Loading, Composite Structures, vol. 143, pp./ 388-394, 2016.

• P Baudoin, V Magnier, A El Bartali, J.-F Witz, Ph Dufrenoy, F Demilly and E Charkaluk, Numerical investigation of fatigue strength of grain size gradient materials under heterogeneous stress states in a notched specimen, International Journal of Fatigue, vol. 87, pp. 132-142, 2016.

• E Svenning, M Fagerström and F Larsson, On computational homogenization of microscale crack propagation, International Journal for Numerical Methods in Engineering, vol. 108, pp. 76-90, 2016.

• M Toifl, R Meisels, P Hartlieb, F Kuchar and Th Antretter, 3D numerical study on microwave induced stresses in inhomogeneous hard rocks, Minerals Engineering, vol. 90, pp. 29-42, 2016.

• R Brommesson, M Ekh and C Joseph, 3D grain structure modelling of intragranular fracture in forged Haynes 282, Engineering Fracture Mechanics, vol. 154, pp. 57-71, 2016.

• T Auger, S Hémery, M Bourcier, C Berdin, M Martin and I Robertson, Crack path in liquid metal embrittlement: experiments with steels and modeling, Fracture and Structural Integrity, vol. 35, pp. 250-259, 2016.

• S El Shawish and L Cizelj, Numerical investigation of grain misorientations at and close to the free surface of FCC polycrystalline metals, Computational Materials Science, vol. 113, pp. 133-142, 2016.

• E Renner, Y Gaillard, F Richard, F Amiot and P Delobelle, Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel, International Journal of Plasticity, vol. 77, pp. 118-140, 2016.

• JV Beeck, F Maresca, TWJ de Geus, PJG Schreurs and MGD Geers, Predicting deformation-induced polymer-steel interface roughening and failure, European Journal of Mechanics / A Solids, vol. 55, pp. 1-11, 2016.

2015

• R Quey, JH Driver and PR Dawson Intra-grain orientation distributions in hot-deformed aluminium: Orientation dependence and relation to deformation mechanisms, Journal of the Mechanics and Physics of Solids, vol. 84, pp. 506-527, 2015.

• J Zhang, ZH Chen and CF Dong, Simulating Intergranular Stress Corrosion Cracking in AZ31 Using Three-Dimensional Cohesive Elements for Grain Structure, Journal of Materials Engineering and Performance, vol. 24, pp. 4908-4918, 2015

• A Van Pamel, CR Brett, P Huthwaite and MJS Lowe, Finite element modelling of elastic wave scattering within a polycrystalline material in two and three dimensions, Journal of the Acoustical Society of America, vol. 138, pp. 2326-2336, 2015.

• V Gulizzi, A Milazzo and I Benedetti, An enhanced grain-boundary framework for computational homogenization and micro-cracking simulations of polycrystalline materials, Computational Mechanics, DOI 10.1007/s00466-015-1192-8.

• A Cruzadoa, B Gana, M Jiméneza, D Barbaa, K Ostolazab, A Linazab, JM Molina-Aldareguiaa, J Llorcaa and J Segurado, Multiscale modeling of the mechanical behavior of IN718 superalloy based on micropillar compression and computational homogenization , Acta Materialia, vol. 98, pp. 242-253, 2015.

• E Svenning, On computational homogenization of fracturing continua , Licentiate Thesis, Chalmers Univeristy of Technology, 2015.

• L Zhang, W Xu, J Long and Z Lei, Surface Roughening Analysis of Cold Drawn Tube Based on Macro-micro Coupling Finite Element Method, Journal of Materials Processing Technology, vol. 224, pp. 189-199, 2015.

• SL Wong, M Obstalecki, MP Miller and PR Dawson, Stress and deformation heterogeneity in individual grains within polycrystals subjected to fully reversed cyclic loading, Journal of the Mechanics and Physics of Solids, vol. 79, pp. 157-185, 2015.

• H Oezelt, A Kovacs, F Reichel, J Fischbacher, S Bance, M Gusenbauer, C Schubert, M Albrecht and T Schrefl, Micromagnetic simulation of exchange coupled ferri-/ferromagnetic heterostructures, Journal of Magnetism and Magnetic Materials, vol. 381, pp. 28-33, 2015.

• G Lhoutellier, D Ledue, R Patte, F Barbe, B Dierny and V Baltz, Bimodal distribution of blocking temperature for exchange-bias ferromagnetic/antiferromagnetic bilayers: a granular Monte Carlo study with less stable magnetic regions spread over the interface, Journal of Physics D: Applied Physics, 2015.

• L-T Li, YC Lin, L Li, L-M Shen and D-X Wen, Three-Dimensional Crystal Plasticity Finite Element Simulation of Hot Compressive Deformation Behaviors of 7075 Al Alloy, Journal of Materials Engineering and Performance, vol. 24, pp. 1294-1304, 2015.

• H Oezelt, A Kovacs, P Wohlhüter, E Kirk, D Nissen, P Matthes, LJ Heyderman, M Albrecht and T Schrefl, Micromagnetic simulation of exchange coupled ferri-/ferromagnetic composite in bit patterned media, Journal of Applied Physics, vol. 117, 17E501, 2015.

2014

• MP Miller and PR Dawson, Understanding local deformation in metallic polycrystals using high energy X-rays and finite elements, Current Opinion in Solid State and Materials Science, vol. 18, pp. 286-299, 2014.

• A Acerboa, M Miller and J Ruffc, 2014 CHESS Users’ Meeting and Workshops, Synchrotron Radiation News, vol. 27, pp. 21-24, 2014.

• E Ghazvinian, MS Diederichs and R Quey, 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing, Journal of Rock Mechanics and Geotechnical Engineering, vol. 6, pp. 506-521, 2014.

• K Zhang, B Holmedal, OS Hopperstad and S Dumoulin, Modelling the plastic anisotropy of aluminum alloy 3103 sheets by polycrystal plasticity, Modelling and Simulation in Materials Science and Engineering, vol. 22, pp. 75015-75034, 2014.

• S Falco, P Siegkas, E Barbieri and N Petrinic, A new method for the generation of arbitrarily shaped 3D random polycrystalline domains, Computational Mechanics, vol. 54, pp. 1447-1460, 2014.

• V Lacaille, C Morel, E Feulvarch and G Kermouche, Finite element analysis of the grain size effect on diffusion in polycrystalline materials, Computational Materials Science, vol. 95, pp. 187-191, 2014.

• DL Cortie, AG Biternas, RW Chantrell, XL Wang and F Klose, Microscopic model for exchange bias from grain-boundary disorder in a ferromagnet/antiferromagnet thin film with a nanocrystalline microstructure, Applied Physics Letters, vol. 105, 032402, 2014.

• D Ledue, A Maitre, F Barbe and L Lechevallier, Temperature dependence of the exchange bias properties of ferromagnetic/antiferromagnetic polycrystalline bilayers, Journal of Magnetism and Magnetic Materials, vol. 372, pp. 134-140, 2014.

• J Deng, D Morgan and I Szlufarska, Kinetic Monte Carlo simulation of the effective diffusivity in grain boundary networks, Computational Materials Science, vol. 93, pp. 36-45, 2014.

• M Obstalecki, SL Wong, PR Dawson and M.P Miller, Quantitative analysis of crystal scale deformation heterogeneity during cyclic plasticity using high-energy X-ray diffraction and finite-element simulation, Acta Materialia, vol. 75, pp. 259-272, 2014.

• L Li, L Shen and G Proust, A texture-based representative volume element crystal plasticity model for predicting Bauschinger effect during cyclic loading, Materials Science and Engineering A, vol. 608, pp. 174-183, 2014.

• K Zang, B Holmedal, OS Hopperstad, S Dumoulin, J Gawad, A Van Bael and P Van Houtte, Multi-level Modelling of Mechanical Anisotropy of Commercial Pure Aluminium Plate: Crystal Plasticity Models, Advanced Yield Functions and Parameter Identification, International Journal of Plasticity, vol. 66, pp. 3-30, 2015.

• D Gonzalez, I Simonovski, PJ Withers and J Quinta da Fonseca, Modelling the effect of elastic and plastic anisotropies on stresses at grain boundaries, International Journal of Plasticity, vol. 61, pp. 49-63, 2014.

2013

• A Fernández, A Jérusalem, I Gutiérrez-Urrutia and MT Pérez-Prado, Three-dimensional investigation of grain boundary-twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling, Acta Materialia, vol. 61, pp. 7679-7692, 2013

• SL Wong, J-S Park, M P Miller and P R Dawson, A framework for generating synthetic diffraction images from deforming polycrystals using crystal-based finite element formulations, Computational Materials Science, vol. 77, pp. 456-466, 2013.

• L Li, L Shen, G Proust, Ch KS Moy and G Ranzi, Three-dimensional crystal plasticity finite element simulation of nanoindentation on aluminium alloy 2024, Materials Science and Engineering: A, vol.. 579, pp. 41-49, 2013.

2012

• J Montalvo-Urquizo, P Bobrov, A Schmidt and W Wosniok, Elastic responses of texturized microscale materials using FEM simulations and stochastic material properties, Mechanics of Materials, vol. 47, pp. 1-10, 2012.

• CN N’Guyen , F Barbe, N Osipov, G Cailletaud, B Marini and C Petry, Micromechanical local approach to brittle failure in bainite high resolution polycrystals: a short presentation, Computational Material Science, vol. 64, pp. 62-65, 2012.

• A Maitre, D Ledue, F Barbe, R Patte, Temperature effect in polycrystalline exchange-biased bilayers: A Monte Carlo study, Journal of Applied Physics, vol. 111, 07D105, 2012.

• R Quey, PR Dawson and JH Driver, Orientation fragmentation in hot-deformed polycrystalline aluminium: Experiment and simulation, Journal of the Mechanics and Physics of Solids, vol. 60, pp. 509-524, 2012.

• A Tahimi, F Barbe, L Taleb, R Quey and A Guillet, Evaluation of microstructure-based transformation plasticity models from experiments on 100C6 steel, Computational Materials Science, vol. 52, pp. 55-60, 2012.

2011

• R Quey, PR Dawson and F Barbe, Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing, Computer Methods in Applied Mechanics and Engineering, vol. 200, pp. 1729-1745, 2011.

• F Barbe and R Quey, A numerical modelling of 3D polycrystal-to-polycrystal diffusive phase transformations involving crystal plasticity, International Journal of Plasticity, vol. 27, pp. 823-840, 2011.

2009

• F Barbe, R Quey, A Musienko and G Cailletaud, Three-dimensional characterization of strain localization bands in high-resolution elastoplastic polycrystals, Mechanics Research Communications, vol. 39, pp. 762-768, 2009.

2008

• H Hoang, F Barbe, R Quey and L Taleb, FE determination of the plasticity induced during diffusive transformation in the case of nucleation at random locations and instants, Computational Materials Science, vol. 43, pp. 101-107, 2008.

• F Barbe, R Quey, L Taleb and E Souza de Cursi, Numerical modelling of the plasticity induced during diffusive transformation An ensemble averaging approach for the case of random arrays of nuclei, European Journal of Mechanics, A/Solids, vol. 27, pp. 1121-1139, 2008.

2007

• F Barbe, R Quey and L Taleb, Numerical modelling of the plasticity induced during diffusive transformation Case of a cubic array of nuclei, European Journal of Mechanics, A/Solids, vol. 26, pp. 611-625, 2007.