.. _applications: Applications ============ Here is a tentative list of the works (journal papers and books) using Neper. If you think your work should be listed here, please `contact us `_. This list is also available on Neper's `Google Scholar page `_. Journal Covers -------------- On a few occasions, Neper images made journal covers. Congratulations to the authors! - B Flipon, C Keller, R Quey and F Barbe, *A full-field crystal-plasticity analysis of bimodal polycrystals*, **International Journal of Solids and Structures**, vol. 184, pp. 178--192, 2020. `Flipon et al.'s journal cover `_ - R Carson, M Obstalecki, M Miller and P Dawson, *Characterizing Heterogeneous Intragranular Deformations in Polycrystalline Solids Using Diffraction-Based and Mechanics-Based Metrics*, **Modelling and Simulation in Materials Science and Engineering**, vol. 25, pp. 055008, 2017. `Carson et al.'s journal cover `_ 2022 ---- - B Engel, M Huth and C Hyde, *Numerical Investigation into the Influence of Grain Orientation Distribution on the Local and Global Elastic-Plastic Behaviour of Polycrystalline Nickel-Based Superalloy INC-738 LC*, **Crystals**, https://doi.org/10.3390/cryst12010100. - O Bulut, SS Acar and T Yalçinkaya, *The influence of thickness/grain size ratio in microforming through crystal plasticity*, **Procedia Structural Integrity**, https://doi.org/10.1016/j.prostr.2021.12.069. - HB Boubaker, C Mareau, Y Ayed, G Germain and A Tidu, *A crystal plasticity-based constitutive model for near-β titanium alloys under extreme loading conditions: Application to the Ti17 alloy*, **Mechanics of Materials**, https://doi.org/10.1016/j.mechmat.2021.104198. - X Li, X Li, RDK Misra and Z Chen, *Grain size effect on shearing performance of copper foil: A polycrystal plasticity investigation*, **Mechanics of Materials**, https://doi.org/10.1016/j.mechmat.2022.104212. - V Langlois, CT Nguyen, F Detrez, J Guilleminot and C Perrot, *Permeability of polydisperse solid foams*, **Physical Review E**, https://doi.org/10.1103/PhysRevE.105.015101. - J Wang, C Zhou, *Analysis of crack initiation location and its influencing factors of fretting fatigue in aluminum alloy components*, **Chinese Journal of Aeronautics**, https://doi.org/10.1016/j.cja.2021.12.011. - X Zhang, X Lu, J Zhao, Q Kan, Z Li, G Kang, *Temperature effect on tensile behavior of an interstitial high entropy alloy: crystal plasticity modeling*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2021.103201. - P Fernandez-Zelaia, Y Lee, S Dryepondt, MM Kirka, *Creep anisotropy modeling and uncertainty quantification of an additively manufactured Ni-based superalloy*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2021.103177. - E Natkowski, P Sonnweber-Ribic, S Münstermann, *Determination of fatigue lifetimes with a micromechanical short crack model for the high-strength steel SAE 4150*, **International Journal of Fatigue**, https://doi.org/10.1016/j.ijfatigue.2021.106621. - D Zhu, W Zhang and Z Ding, *Dislocation Density Evolution in Low-Cycle Fatigue of Steels Using Dislocation-Based Crystal Plasticity*, **Journal of Engineering Mechanics**, https://doi.org//10.1061/(ASCE)EM.1943-7889.0002063. - T Grabec, IA Veres and M Ryzy, *Surface acoustic wave attenuation in polycrystals: Numerical modeling using a statistical digital twin of an actual sample*, **Ultrasonics**, https://doi.org/10.1016/j.ultras.2021.106585. 2021 ---- - A Rovinelli, MC Messner, DM Parks and TL Sham, *Accurate Effective Stress Measures: Predicting Creep Life for 3D Stresses Using 2D and 1D Creep Rupture Simulations and Data*, **Integrating Materials and Manufacturing Innovation**, https://doi.org/10.1007/s40192-021-00228-1. - A Rajaei, Y Deng, O Schenk, S Rooein, A Bezold and C Broeckmann, *Numerical Modelling of the Powder Metallurgical Manufacturing Chain of High Strength Sintered Gears*, **Chinese Journal of Mechanical Engineering**, https://doi.org/10.1186/s10033-021-00646-4. - L Yin and O Umezawa, *Crystal plasticity analysis of temperature-sensitive dwell fatigue in Ti-6Al-4V titanium alloy for an aero-engine fan disc*, **International Journal of Fatigue**, https://doi.org/10.1016/j.ijfatigue.2021.106688. - X Hu, X Gong, N Xie, Q Zhu, P Guo, H Hu and J Ma, *Modeling crack propagation in heterogeneous granite using grain-based phase field method*, **Theoretical and Applied Fracture Mechanics**, https://doi.org/10.1016/j.tafmec.2021.103203. - JY Zheng, JQ Ran and MW Fu, *Constitutive Modeling of Multiscale Polycrystals Considering Grain Structures and Orientations*, **International Journal of Mechanical Sciences**, https://doi.org/10.1016/j.ijmecsci.2021.106992. - K Zhong, S Wang, K Liu, D Xu, J Yao, *Fourier Transform Analysis on Random Quasi-Phase-Matched Nonlinear Optical Interactions*, **IEEE Photonics Journal**, https://doi.org/10.1109/JPHOT.2021.3134666. - N Grilli, D Hu, D Yushu, F Chen, W Yan, *Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method*, **Computational Mechanics**, https://doi.org/10.1007/s00466-021-02116-z. - AG Neto, B Hudobivnik, TF Moherdaui and P Wriggers, *Flexible polyhedra modeled by the virtual element method in a discrete element context*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2021.114163. - C Fang, J Gong, M Jia, Z Nie, B Li, A Mohammed and L Zhao, *DEM simulation of the shear behaviour of breakable granular materials with various angularities*, **Advanced Powder Technology**, https://doi.org/10.1016/j.apt.2021.09.009. - S Rezaei, A Asheri and BX Xu, *A consistent framework for chemo-mechanical cohesive fracture and its application in solid-state batteries*, **Journal of the Mechanics and Physics of Solids**, https://doi.org/10.1016/j.jmps.2021.104612. - U Ro, S Kim, Y Kim and MK Kim, *Creep-Fatigue damage analysis of modified 9Cr–1Mo steel based on a Voronoi crystalline model*, **International Journal of Pressure Vessels and Piping**, https://doi.org/10.1016/j.ijpvp.2021.104541. - W Zhao, J Sun and Z Huang, *Three-dimensional graphene-carbon nanotube reinforced ceramics and computer simulation*, **Ceramics International**, https://doi.org/10.1016/j.ceramint.2021.08.304. - KA Meyer and A Menzel, *A distortional hardening model for finite plasticity*, **International Journal of Solids and Structures**, https://doi.org/10.1016/j.ijsolstr.2021.111055. - X Zhang and C Oskay, *Modeling and Numerical Investigation of Mechanical Twinning in β-HMX Crystals Subjected to Shock Loading*, **Modelling and Simulation in Materials Science and Engineering**, https://doi.org/10.1088/1361-651X/ac21a6. - A Vuppala, A Krämer and J Lohmar, *On Sampling Discrete Orientations from XRD for Texture Representation in Aggregates with Varying Grain Size*, **Crystals**, https://doi.org/10.3390/cryst11091021. - IAR Lopes, FMA Pires, *Unlocking the Potential of Second-order Computational Homogenisation: An Overview of Distinct Formulations and a Guide for their Implementation*, **Archives of Computational Methods in Engineering**, https://doi.org/10.1007/s11831-021-09611-9. - T Beck, B Engel, L Mäde and S Ohneseit, *Influence of Grain Orientation Distribution on the High Temperature Fatigue Behaviour of Notched Specimen Made of Polycrystalline Nickel-Base Superalloy*, **Metals**, https://doi.org/10.3390/met11050731. - L Fourel, JP Noyel, E Bossy, X Kleber, P Sainsot and F Ville, *Towards a Grain-scale Modeling of Crack Initiation in Rolling Contact Fatigue-Part 1: Shear Stress Considerations*, **Tribology International**, https://doi.org/10.1016/j.triboint.2021.107224. - RJ Lane, AM Momen, MS Kesler, J Brechtl, O Rios, K Nawaz and R Mirzaeifar, *Developing an experimental-computational framework to investigate the deformation mechanisms and mechanical properties of Al-8Ce-10Mg alloys at micro and macroscales*, **Materials Today Communications**, https://doi.org/10.1016/j.mtcomm.2021.102674. - D Depriester, R Kubler, *Grain size estimation in polycrystals: solving the corpuscle problem using Maximum Likelihood Estimation*, **Journal of Structural Geology**, https://doi.org/10.1016/j.jsg.2021.104418. - S Zhang, S Qiu, P Kou, S Li, P Li, S Yan, *Investigation of Damage Evolution in Heterogeneous Rock Based on the Grain-Based Finite-Discrete Element Model*, **Materials**, https://doi.org/10.3390/ma14143969. - H Ding and Y Gao, *Analysis of the strain dependence of the superconducting critical properties of single-crystal and polycrystalline Nb3Sn*, **Superconductor Science and Technology**, vol 34, pp 075006. - SS Kulkarni, V Gupta, D Senor, T Truster, A Soulami, *A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates*, **Computational Materials Science** https://doi.org/10.1016/j.commatsci.2021.110654. - H Ge, JC Quezada, V Le Houerou, C Chazallon, *Three-dimensional simulation of asphalt mixture incorporating aggregate size and morphology distribution based on contact dynamics method*, **Construction and Building Materials**, https://doi.org/10.1016/j.conbuildmat.2021.124124. - L Fourel, JP Noyel, E Bossy, X Kleber, P Sainsot, F Ville, *Towards a Grain-scale Modeling of Crack Initiation in Rolling Contact Fatigue-Part 2: Persistent Slip Band Modeling*, **Tribology International**, https://doi.org/10.1016/j.triboint.2021.107173. - Y Bai, DA Santos, S Rezaei, P Stein, S Banerjee, B-X Xu, *A chemo-mechanical damage model at large deformation: numerical and experimental studies on polycrystalline energy materials*, **International Journal of Solids and Structures**, https://doi.org/10.1016/j.ijsolstr.2021.111099. - J Wang, Y Wang, L Yang, T Chang and Q Jiang, *Effects of Bedding Geometry and Cementation Strength on Shale Tensile Strength Based on Discrete Element Method*, **Shock and Vibration**, https://doi.org/10.1155/2021/7805617. - S Chandra, MK Samal, NN Kumar and VM Chavan, *Simulation of Hall–Petch effect in alloy 690 using crystal plasticity model considering effect of grain boundaries*, **Materials Letters**, https://doi.org/10.1016/j.matlet.2021.129915. - IAR Lopes, BP Ferreira and FMA Pires, *On the efficient enforcement of uniform traction and mortar periodic boundary conditions in computational homogenisation*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2021.113930. - M Huang, SI Rokhlin and MJS Lowe, *Finite element evaluation of a simple model for elastic waves in strongly scattering elongated polycrystals*, **JASA Express Letters**, https://doi.org/10.1121/10.0005266. - C-N Nguyen, G Cailletaud, F Barbe, B Marini, D-D Nguyen and H-T Phan, *Identification of crystal plasticity parameters for a non-irradiated and irradiated A508 bainite steel*, **Metallurgical Research and Technology**, https://doi.org/10.1051/metal/2021006. - S El Shawish, T Mede, J Hure, *A single grain boundary parameter to characterize normal stress fluctuations in materials with elastic cubic grains*, **European Journal of Mechanics-A/Solids**, https://doi.org/10.1016/j.euromechsol.2021.104293. - Y Liu, MK Kalkowski, M Huang, MJS Lowe, V Samaitis, V Cicenas and A Schumm, *Can ultrasound attenuation measurement be used to characterise grain statistics in castings?*, **Ultrasonics**, https://doi.org/10.1016/j.ultras.2021.106441. - MP Echlin, M Kasemer, K Chatterjee, D Boyce, JC Stinville, PG Callahan, E Wielewski, J-S Park, JC Williams, RM Suter, TM Pollock, MP Miller and PR Dawson, *Microstructure-Based Estimation of Strength and Ductility Distributions for alpha + beta Titanium Alloys*, **Metallurgical and Materials Transactions A**, https://doi.org/10.1007/s11661-021-06233-5. - M Huang, G Sha, P Huthwaite, SI Rokhlin and MJS Lowe, *Longitudinal wave attenuation in polycrystals with elongated grains: 3D numerical and analytical modeling*, **The Journal of the Acoustical Society of America**, https://doi.org/10.1121/10.0003955. - Z Wang, S Yang, L Li, Y Tang and G Xu, *A 3D Voronoi clump based model for simulating failure behavior of brittle rock*, **Engineering Fracture Mechanics**, https://doi.org/10.1016/j.engfracmech.2021.107720. - D Weisz-Patrault, S Sakout and A Ehrlacher, *Energetic upscaling strategy for grain growth. II: Probabilistic macroscopic model identified by Bayesian techniques*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2021.116805. - C Böhm, B Hudobivnik, M Marino and P Wriggers, *Electro-magneto-mechanically response of polycrystalline materials: Computational homogenization via the Virtual Element Method*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2021.113775. - KO Coelho, PRB Devloo and SM Gomes, *Error estimates for the Scaled Boundary Finite Element Method*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2021.113765. - R Quey, G-H Fan, Y Zhang and D Juul Jensen, *Importance of deformation-induced local orientation distributions for nucleation of recrystallisation*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2021.116808. - B Yan, S Jiang, L Hu, Y Zhang and D Sun, *Crystal plasticity finite element simulation of NiTi shape memory alloy under canning compression based on constitutive model containing dislocation density*, **Mechanics of Materials**, https://doi.org/10.1016/j.mechmat.2021.103830. - M Gusenbauer, A Kovacs, H Oezelt, J Fischbacher, P Zhao, TG Woodcock and T Schrefl, *Insights into MnAl-C nano-twin defects by micromagnetic characterization*, **Journal of Applied Physics**, https://doi.org/10.1063/5.0035387. - XF Li, HB Li, GK Zhang, MH Ju, J Zhao, *Rate dependency mechanism of crystalline rocks induced by impacts: Insights from grain-scale fracturing and micro heterogeneity*, **International Journal of Impact Engineering**, https://doi.org/10.1016/j.ijimpeng.2021.103855. - CS Kim, SL Ding, JH Kim, C Yun, WY Yang, JZ Han, SQ Liu, HL Du, CS Wand and JB Zhang, *Micromagnetic study of sphericity effect in bulk permanent magnets*, **Journal of Applied Physics**, https://doi.org/10.1063/5.0040434. - S Chandra, MK Samal, NN Kumar, VM Chavan, *Atomistically informed crystal plasticity analysis of deformation behavior of alloy 690 including grain boundary effects*, **Materialia**, https://doi.org/10.1016/j.mtla.2021.101053. - B Ravaji and SP Joshi, *A crystal plasticity investigation of grain size-texture interaction in magnesium alloys*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2021.116743. - T Fischer, S Ulan kyzy, O Munz and E Werner, *Structure-property relationship of a nickel-based honeycomb sealing composite*, **Computational Materials Science**, https://doi.org/10.1016/j.commatsci.2020.110270. - H Yu, AD Taleghani, Z Lian, *A New Look at Rock Mechanical Behavior from the Meso-Scale Grain*, **Journal of Petroleum Science and Engineering**, https://doi.org/10.1016/j.petrol.2021.108373. - N Grilli, E Tarleton, ACF Cocks, *Neper2CAE and PyCiGen: Scripts to generate polycrystals and interface elements in Abaqus*, **SoftwareX**, https://doi.org/10.1016/j.softx.2020.100651. - M Huang, G Sha, P Huthwaite, SI Rokhlin and MJS Lowe, *Elastic wave velocity dispersion in polycrystals with elongated grains: Theoretical and numerical analysis*, **The Journal of the Acoustical Society of America**, https://doi.org/10.1121/10.0002916. - L Qiao, Y He, H Wang, Z Shi, Z Li, G Xiao and L Yang, *Effect of grain boundary deformation on the critical temperature degradation of superconducting Nb3Sn under hydrostatic pressure*, **Journal of Alloys and Compounds**, https://doi.org/10.1016/j.jallcom.2020.158116. - J Cappola, JC Stinville, MA Charpagne, PG Callahan, MP Echlin, TM Pollock, A Pilchak and M Kasemer, *On the Localization of Plastic Strain in Microtextured Regions of Ti-6Al-4V*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2020.116492. - S Ganesan, M Yaghoobi, A Githens, Z Chen, S Daly, J Allison and VSundararaghavan, *The effects of heat treatment on the response of WE43 Mg alloy: crystal plasticity finite element simulation and SEM-DIC experiment*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2020.102917. - GZ Voyiadjis, J Jeong, JW Kysar, *Grain size dependence of polycrystalline plasticity modeling in cylindrical indentation*, **Computational Mechanics**, https://doi.org/10.1007/s00466-020-01940-z. - XF Li, HB Li and J Zhao, *Transgranular fracturing of crystalline rocks and its influence on rock strengths: Insights from a grain-scale continuum–discontinuum approach*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2020.113462. 2020 ---- - F Barbe, I Benedetti, V Gulizzi, M Calvat and C Keller, *Elucidating the effect of bimodal grain size distribution on plasticity and fracture behavior of polycrystalline materials*, **Journal of Multiscale Modelling**, https://doi.org/10.1142/S1756973720500079. - TF Fu, T Xu, PLP Wasantha, TH Yang, Y Nara and Z Heng, *Time-dependent deformation and fracture evolution around underground excavations*, **Geomatics, Natural Hazards and Risk**, https://doi.org/10.1080/19475705.2020.1856202. - CT Nguyen, J Guilleminot, F Detrez, V Langlois, M Bornert, A Duval and C Perrot, *Micro-Macro Acoustic Modeling of Heterogeneous Foams with Nucleation Perturbation*, **SAE Technical Paper**, https://doi.org/10.4271/2020-01-1526. - M Boåsen, CFO Dahlberg, P Efsing, J Faleskog, *A weakest link model for multiple mechanism brittle fracture-Model development and application*, **Journal of the Mechanics and Physics of Solids**, 2020. - A Sharma, A Vijay, F Sadeghi, *Finite Element Modeling of Fretting Wear in Anisotropic Composite Coatings: Application to HVOF Cr3C2–NiCr Coating*, **Tribology International**, https://doi.org/10.1016/j.triboint.2020.106765. - L Qiao, J Yang, X Yang, K Han, Z Li, G Xiao, L Yang, *Grain boundary deformation in uniaxial strained Nb3Sn*, **Cryogenics**, https://doi.org/10.1016/j.cryogenics.2020.103210. - P Wriggers, *Multilevel Material Modeling to Study Plastic Deformation for Sheet-Bulk Metal Forming Under Different Loading Histories*, **Sheet bulk metal forming**, Springer. - E Moshkelgosha and M Mamivand, *Concurrent modeling of martensitic transformation and crack growth in polycrystalline Shape Memory Ceramics*, **Engineering Fracture Mechanics**, https://doi.org/10.1016/j.engfracmech.2020.107403. - R Ma and WC Sun, *Phase field modeling of coupled crystal plasticity and deformation twinning in polycrystals with monolithic and splitting solvers*, **International Journal for Numerical Methods in Engineering**, https://doi.org/10.1002/nme.6577. - M Huang, G Sha, P Huthwaite, SI Rokhlin and MJS Lowe, *Maximizing the accuracy of finite element simulation of elastic wave propagation in polycrystals*, **The Journal of the Acoustical Society of America**, https://doi.org/10.1121/10.0002102. - B Pulatsu, S Gonen, E Erdogmus, PB Lourenço, JV Lemos and J Hazzard, *Tensile Fracture Mechanism of Masonry Wallettes Parallel to Bed Joints: A Stochastic Discontinuum Analysis*, **Modelling**, https://doi.org/10.3390/modelling1020006. - J Chen, P Zhang, Y Cheng, J Liu, *On the crushing response of the functionally graded metallic foams based on 3D Voronoi model*, **Thin-Walled Structures**, vol. 157, pp. 107085. - Y Huillca, M Silva, C Ovalle, JC Quezada, S Carrasco, GE Villavicencio, *Modelling size effect on rock aggregates strength using a DEM bonded-cell model*, **Acta Geotechnica**, https://doi.org/10.1007/s11440-020-01054-z. - S Tian, R Cao, J Zhou, F Xue, Y Liu, P Zhang, ZM Sun, *A comparative study on the growth behaviors of Sn whiskers and hillocks in a Sn-Al alloy coating under different environments*, **Journal of Alloys and Compounds**, https://doi.org/10.1016/j.jallcom.2020.157101. - Y Guo, J He, H Jiang, Y Zhou, F Jin, C Song, *A Simple Approach for Generating Random Aggregate Model of Concrete Based on Laguerre Tessellation and Its Application Analyses*, **Materials**, vol. 13, pp. 3896, 2020. - AM Schönhöbel, R Madugundo, JM Barandiarán, GC Hadjipanayis, D Palanisamy, T Schwarz, B Gault, D Raabe, K Skokov, O Gutfleisch, J Fischbacher and T Schrefl, *Nanocrystalline Sm-based 1: 12 magnets*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2020.08.075. - Z Pawlas, I Karafiatova and L Heller, *Random tessellations marked with crystallographic orientations*, **Spatial Statistics**, https://doi.org/10.1016/j.spasta.2020.100469. - M Bouchedjra, A Amrouche, T Kanit and MEA Belouchrani, *Microstructural features effect on the evolution of cyclic damage for polycrystalline metals using a multiscale approach*, **International Journal of Damage Mechanics**, https://doi.org/10.1177/1056789520950409. - A Charmi, R Falkenberg, L Ávila, G Mohr, K Sommer, A Ulbricht, M Sprengel, R Saliwan Neumann, B Skrotzki and A Evans, *Mechanical anisotropy of additively manufactured stainless steel 316L: An experimental and numerical study*, **Materials Science and Engineering: A**, https://doi.org/10.1016/j.msea.2020.140154. - PR Prakash, B Polatsu, PB Lourenco, M Azenha and JA Pereira, *A meso-scale discrete element method framework to simulate thermo-mechanical failure of concrete subjected to elevated temperatures*, **Engineering Fracture Mechanics**, https://doi.org/10.1016/j.engfracmech.2020.107269. - T Xu, T-F Fu, MJ Heap, PG Meredith, TM Mitchell and P Baud, *Mesoscopic Damage and Fracturing of Heterogeneous Brittle Rocks Based on Three-dimensional Polycrystalline Discrete Element Method*, **Rock Mechanics and Rock Engineering**, https://doi.org/10.1007/s00603-020-02223-y. - A Saini, S Unnikirishnakurup, CV Krishnamurthy, K Balasubramanian and T Sundarajan, *Numerical study using finite element method for heat conduction on heterogeneous materials with varying volume fraction, shape and size of fillers*, **International Journal of Thermal Sciences**, https://doi.org/10.1016/j.ijthermalsci.2020.106545. - D An, X Zhang and S Zaefferer, *The combined and interactive effects of orientation, strain amplitude, cycle number, stacking fault energy and hydrogen doping on microstructure evolution of polycrystalline high-manganese steels under low-cycle fatigue*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2020.102803. - S Sakout, D Weisz-Patrault and A Ehrlacher, *Energetic upscaling strategy for grain growth. i: Fast mesoscopic model based on dissipation*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2020.06.032. - B Pulatsu, E Erdogmus, PB Lourenço, JV Lemos and K Tuncay, *Numerical modeling of the tension stiffening in reinforced concrete members via discontinuum models*, **Computational Particle Mechanics**, https://doi.org/10.1007/s40571-020-00342-5. - T Richeton, X Chen and S Berbenni, *Misorientation dependence of the grain boundary migration rate: role of elastic anisotropy*, **Philosophical Magazine**, https://doi.org/10.1080/14786435.2020.1779368. - R Ma and W Sun, *Computational thermomechanics for crystalline rock. Part II: Chemo-damage-plasticity and healing in strongly anisotropic polycrystals*, **Computer Methods in Applied Mechanics and Engineering**, vol. 369, pp. 113184, 2020. - H Hippke, S Hirsiger, B Berisha and Pavel Hora, *Optimized and validated prediction of plastic yielding supported by cruciform experiments and crystal plasticity*, **International Journal of Material Forming**, https://doi.org/10.1007/s12289-020-01569-6. - S Yuan, Y Zhu, M Huang, S. Liang and Z Li, *Dislocation-density based crystal plasticity model with hydrogen-enhanced localized plasticity in polycrystalline face-centered cubic metals*, **Mechanics of Materials**, vol. 148, pp. 103472, 2020. - J Nunes-Pereira, PMC Carneiro, A Maceiras, C Baudín and AP Silva, *Modelling of elastic modulus of CaZrO3-MgO composites using isotropic elastic and anisotropic models*, **Journal of the European Ceramic Society**, https://doi.org/10.1016/j.jeurceramsoc.2020.05.050. - SM Tewari and RS Ayyagari, *A novel approach to generating microstructurally-aware non-convex domains*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2020.113117. - X Lu, J Zhao, C Yu, Z Li, Q Kan, G Kang and X Zhang, *Cyclic plasticity of an interstitial high-entropy alloy: Experiments, crystal plasticity modeling, and simulations*, **Journal of the Mechanics and Physics of Solids**, https://doi.org/10.1016/j.jmps.2020.103971. - M Pippig and F Mercuri, *Efficient evaluation of Coulomb interactions in kinetic Monte Carlo simulations of charge transport*, **The Journal of Chemical Physics**, https://doi.org/10.1063/5.0003258. - PP Indurkar, S Baweja, R Perez, SP Joshi, *Predicting textural variability effects in the anisotropic plasticity and stability of hexagonal metals: Application to magnesium and its alloys*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2020.102762. - Z Wang, J Zhang, G Li, Z Xu, H Zhang, J Zhang, A Hartmaier, F Fang and T Sun, *Anisotropy-Related Machining Characteristics in Ultra-Precision Diamond Cutting of Crystalline Copper*, **Nanomanufacturing and Metrology**, https://doi.org/10.1007/s41871-020-00060-9. - G Sha, M Huang, MJS Lowe and SI Rokhlin, *Attenuation and velocity of elastic waves in polycrystals with generally anisotropic grains: Analytic and numerical modeling*, **The Journal of the Acoustical Society of America**, https://doi.org/10.1121/10.0001087. - L Kuna, J Mangeri, EP Gorzkowski, JA Wollmershauser and S Nakhmanson, *Mesoscale modeling of light transmission modulation in ceramics*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2020.03.040. - Z Wang, J Zhang, G Li, Z Xu, H Zhang, J Zhang, A Hartmaier, F Fang, Y Yan and T Sun, *Anisotropy-Related Machining Characteristics in Ultra-Precision Diamond Cutting of Crystalline Copper*, **Nanomanufacturing and Metrology**, https://doi.org/10.1007/s41871-020-00060-9. - H Li, H Ma, X Shi, H Zhang and JJK Daemen, *A 3D Grain‐Based Model for Simulating the Micromechanical Behavior of Salt Rock*, **Rock Mechanics and Rock Engineering**, https://doi.org/10.1007/s00603-020-02085-4. - M Kasemer, E Zepeda-Alarcon, R Carson, P Dawson and H-R Wenk, *Deformation heterogeneity and intragrain lattice misorientations in high strength contrast dual-phase bridgmanite/periclase*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2020.02.061. - A Ask, S Forest, B Appolaire and K Ammar, *Microstructure evolution in deformed polycrystals predicted by a diffuse interface Cosserat approach*, **Advanced Modeling and Simulation in Engineering Sciences**, https://doi.org/10.1186/s40323-020-00146-5. - TF Fu, T Xu, MJ Heap, PG Meredith and TM Mitchell, *Mesoscopic time-dependent behavior of rocks based on three-dimensional discrete element grain-based model*, **Computers and Geotechnics**, vol. 121, pp. 103472, 2020. - X Liang, C Robert, A Hor and F Morel, *A numerical investigation of the high cycle fatigue sensitivity to microstructure and defect*, **International Journal of Fatigue**, https://doi.org/10.1016/j.ijfatigue.2020.105541. - XF Li, HB Li, LW Liu, YQ Liu, MH Ju and J Zhao, *Investigating the crack initiation and propagation mechanism in brittle rocks using grain-based finite-discrete element method*, **International Journal of Rock Mechanics and Mining Sciences**, https://doi.org/10.1016/j.ijrmms.2020.104219. - R Ma and W Sun, *FFT-based solver for higher-order and multi-phase-field fracture models applied to strongly anisotropic brittle materials*, **Computer Methods in Applied Mechanics and Engineering**, vol. 362, pp. 112781, 2020. - T Rousseau, Y Song, W Wang, S Rastogi, GZ Voyiadjis and JW Kysar, *Order in polycrystalline plasticity deformation fields: Short-range intermittency and long-range persistency*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2020.102674. - B Flipon, C Keller, R Quey and F Barbe, *A full-field crystal-plasticity analysis of bimodal polycrystals*, **International Journal of Solids and Structures**, vol. 184, pp. 178--192, 2020 (made cover of the Journal) - KA Taylor, E Gjonaj and H de Gersem, *Coupled Simulation of Current Flow and Residual Thermal Stress in ZnO Varistors*, **IEEE Transactions on Magnetics**, vol. 56, pp. 7504504, 2020. - D Wicht, M Schneider and T Bohlke, *On Quasi‐Newton methods in FFT‐based micromechanics*, **International Journal for Numerical Methods in Engineering**, https://doi.org/10.1002/nme.6283. - M Marvi-Mashhadi, CS Lopes and J LLorca, *High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams*, **Journal of the Mechanics and Physics of Solids**, vol. 135, pp. 103814, 2020. - S Luo, R Huang, L Zhu and H Yao, *The formation of the Dabashan orocline, central China: Insights from high-resolution 3D crustal shear-wave velocity structure*, **Tectonophysics**, https://doi.org/10.1016/j.tecto.2019.228244. - S El Shawish, P-G Vuncent, H Moulinec, L Cizelj and L Gélébart, *Full-field polycrystal plasticity simulations of neutron-irradiated austenitic stainless steel: A comparison between FE and FFT-based approaches*, **Journal of Nuclear Materials**, https://doi.org/10.1016/j.jnucmat.2019.151927. - M Jalili and B Soltani, *Investigation the micromechanisms of strain localization formation in AZ31 Mg alloy: A mesoscale 3D full-field crystal plasticity computational homogenization study*, **European Journal of Mechanics - A/Solids**, https://doi.org/10.1016/j.euromechsol.2019.103903. - M Diehl, D Wang, C Liu, JR Mianroodi, F Hanb, D Ma, PJJ Kokg, F Roters and P Shanthraj, *Solving material mechanics and multiphysics problems of metals with complex microstructures using DAMASK – The Düsseldorf Advanced Material Simulation Kit*, **Advanced Engineering Materials**, https://doi.org/10.1002/adem.201901044. - T Fischer, SU Kyzy, O Munz and E Werner, *Microstructure-based modelling of rubbing in polycrystalline honeycomb structures*, **Continuum Mechanics and Thermodynamics**, https://doi.org//10.1007/s00161-019-00852-5. - K Chatterjee, RA Carson and P Dawson, *Estimation of Errors in Stress Distributions Computed in Finite Element Simulations of Polycrystals*, **Integrating Materials and Manufacturing Innovation**, https://doi.org/10.1007/s40192-019-00158-z. - PMC Carneiro, PV Gamboa, C Baudin and AP Silva, *Modelling of elastic modulus of a biphasic ceramic microstructure using 3D representative volume elements*, **Journal of the European Ceramic Society**, https://doi.org/10.1016/j.jeurceramsoc.2019.10.046. - SC Aduloju and TJ Truster, *A primal formulation for imposing periodic boundary conditions on conforming and nonconforming meshes*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2019.112663. - C Kurniawan, S Baird, DT Fullwood, ER Homer and OK Johnson, *Grain boundary structure–property model inference using polycrystals: the overdetermined case*, **Journal of Materials Science**, https://doi.org/10.1007/s10853-019-04125-z. - M Kasemer and P Dawson, *A finite element methodology to incorporate kinematic activation of discrete deformation twins in a crystal plasticity framework*, **Computer Methods in Applied Mechanics and Engineering**, vol. 358, pp. 112653, 2020. - D Wicht, M Schneider and T Bohlke, *An efficient solution scheme for small-strain crystal-elasto-viscoplasticity in a dual framework*, **Computer Methods in Applied Mechanics and Engineering**, vol. 358, pp. 112611, 2020. 2019 ---- - K Frydrych and K Kowalczyk-Gajewska, *Grain refinement in the equal channel angular pressing process: simulations using the crystal plasticity finite element method*, **Modelling and Simulation in Materials Science and Engineering**, vol. 26, pp. 065015, 2018. - Y Charles, HT Nguyen, K Ardon and M Gasperini, chapter *Scale Transition in Finite Element Simulations of Hydrogen–Plasticity Interactions* in *Mechanics and Physics of Solids at Micro‐ and Nano‐Scales*, **book edited by Wiley**, 2019. - Y Zhang, G Xiao, C Xu, T Zhou, M Yi and Z Chen, *Cohesive Element Model for Fracture Behavior Analysis of Al2O3/Graphene Composite Ceramic Tool Material*, **Crystals**, vol. 9, pp. 669, 2019. - R Ma and TJ Truster, * Combined crystal plasticity and grain boundary modeling of creep in Ferritic-Martensitic Steels, part 1: Theory and implementation*, **Modelling and Simulation in Materials Science and Engineering**, vol. 27, pp. 075009, 2019. - E Raghami, C Schrank and JH Kruhl, *3D modelling of the effect of thermal-elastic stress on grain-boundary opening in quartz grain aggregates*, **Tectonophysics**, https://doi.org/10.1016/j.tecto.2019.228242. - W Zhang, X Wang, Y Wang, X Yu, Y Gao and Z Feng, *Type IV Failure in Weldment of Creep Resistant Ferritic Alloys: I Micromechanical Origin of Creep Strain Localization in the Heat Affected Zone*, **Journal of the Mechanics and Physics of Solids**, https://doi.org/10.1016/j.jmps.2019.103774. - S Dhala, S Mishra, A Tewari and A Alankar, *Modeling of finite deformation of pseudoelastic NiTi shape memory alloy considering various inelasticity mechanisms*, **International Journal of Plasticity**, vol. 115, pp. 216-237, 2019. - X Gao, X Zhang and A Li, *Numerical Study on Mechanical Properties of Quasi-Continuous SiCp/Al Network Composites with Various Particle Size Ratios (PSRs)*, **International Journal of Applied Mechanics**, vol. 11, pp. 1950065, 2019. - N Guo, CY Sun, YF Zhang and MW Fu, *Analysis of size dependent earing evolution in micro deep drawing of TWIP steel by using crystal plasticity modeling*, **International Journal of Mechanical Sciences**, https://doi.org/10.1016/j.ijmecsci.2019.105200. - TMJ Gebhart, D Jehnichen, R Koschichow, M Muller, M Gobel, V Geske, M Stegelmann and M Gude, *Multi-scale modelling approach to homogenise the mechanical properties of polymeric closed-cell bead foams*, **International Journal of Engineering Science**, vol. 145, pp. 103168, 2019. - H Li, J Yang, Y Han, C Yang, JJK Daemen and P Li, *Weibull grain-based model (W-GBM) for simulating heterogeneous mechanical characteristics of salt rock*, **Engineering Analysis with Boundary Elements**, vol. 108, pp. 227-243, 2019. - H Li, C Yang, X Ding, NT William, H Yin and S Zhang, *Weibull linear parallel bond model (WLPBM) for simulating micro-mechanical characteristics of heterogeneous rocks*, **Engineering Analysis with Boundary Elements**, vol. 108, pp. 82-94, 2019. - M Maghsoudi-Ganjeh, L Lin, X Wang, X Wang and X Zeng, *Computational Modeling of the Mechanical Behavior of 3D Hybrid Organic–Inorganic Nanocomposites*, **JOM**, https://doi.org/10.1007/s11837-019-03737-9. - I Benedetti, V Gulizzi and A Milazzo, *A microstructural model for homogenisation and cracking of piezoelectric polycrystals*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2019.112595. - Y Charles, M Gasperini, N Fagnon, K Ardon and A Duhamel, *Finite element simulation of hydrogen transport during plastic bulging of iron submitted to gaseous hydrogen pressure*, **Engineering Fracture Mechanics**, https://doi.org/10.1016/j.engfracmech.2019.106580. - I Kalyan and CV Krishnamurthy, *Effects of polycrystalline birefringent grains on the morphology dependent resonance modes of a spherical resonator*, **Journal of Applied Physics**, vol. 126, pp. 053102, 2019. - M Ghodrati, M Ahmadian and R Mirzaeifa, *Three-Dimensional Study of Rolling Contact Fatigue Using Crystal Plasticityand Cohesive Zone Method*, **International Journal of Fatigue**, https://doi.org/10.1016/j.ijfatigue.2019.105208. - B Engel, L Mäde, P Lion, N Moch, H Gottschalk and T Beck, *Probabilistic Modeling of Slip System-Based Shear Stresses and Fatigue Behavior of Coarse-Grained Ni-Base Superalloy Considering Local Grain Anisotropy and Grain Orientation*, **Metals**, vol. 9, pp. 813, 2019. - T Yalçinkaya, I Ozdemir and A0 Firat, *Inter-granular cracking through strain gradient crystal plasticity and cohesive zone modeling approaches*, **Theoretical and Applied Fracture Mechanics**, https://doi.org/10.1016/j.tafmec.2019.102306. - H Kanso, R Patte and D Ledue, *Antiferromagnetic thickness and temperature dependence of the exchange bias properties of Co/IrMn nanodots and continuous films: A Monte Carlo study*, **Journal of Magnetism and Magnetic Materials**, vol. 491, pp. 165543, 2019. - F Benmessaoud, V Velay M Cheikh, V Vidal, C Boher and F Rézaï-Aria, *Multi-Scale Numerical Analysis of the Effect of Microstructural Features on the Mechanical Behavior of Polycrystalline Ti-6Al-4V Alloy*, **Engineering Transactions**, https://doi.org/10.24423/EngTrans.1014.20190615. - M Marino, B Hudobivnik and P Wriggers, *Computational homogenization of polycrystalline materials with the Virtual Element Method*, **Computer Methods in Applied Mechanics and Engineering**, vol. 335, pp./ 349-372, 2019. - M Yaghoobi, S Ganesan, S Sundar, A Lakshmaman, S Rudraraju, JE Allison and V Sundararaghavan, *PRISMS-Plasticity: An open-source crystal plasticity finite element software*, **Computational Materials Science**, vol. 169, pp. 109078, 2019. - AC Poshadel and P Dawson, *Role of Anisotropic Strength and Stiffness in Governing the Initiation and Propagation of Yielding in Polycrystalline Solids*, **Metallurgical and Materials Transactions A**, vol. 50, pp. 1185-1201, 2019. - AC Poshadel, MA Gharghouri and P Dawson, *Initiation and Propagation of Plastic Yielding in Duplex Stainless Steel*, **Metallurgical and Materials Transactions A**, vol. 50, pp. 1202-1230, 2019. - AC Poshadel, MA Gharghouri and P Dawson, *Sensitivity of crystal stress distributions to the definition of virtual two-phase samples*, **Metallurgical and Materials Transactions A**, vol. 50, pp. 1231-1249, 2019. - A Vijay and F Sadeghi, *A continuum damage mechanics framework for modeling the effect of crystalline anisotropy on rolling contact fatigue*, **Tribology International**, https://doi.org/10.1016/j.triboint.2019.105845. - RR Tenreiro Vieira, Dde Bortoli, MVieira de Carvalho and FM Andrade Pires, *The role of elastic anisotropy on the macroscopic constitutive response and yield onset of cubic oligo- and polycrystals*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2019.06.007. - K Frydrych, K Kowalczyk-Gajewska and A Prakash, *On solution mapping and remeshing in crystal plasticity finite element simulations: Application to equal channel angular pressing*, **Modelling and Simulation in Materials Science and Engineering**, https://doi.org/10.1088/1361-651X/ab28e3. - S Shivaprasad, C V Krishnamurthy, A Pandala, A Saini, A Ramachandran and K Balasubramaniam, *Numerical Modelling Methods for Ultrasonic Wave Propagation Through Polycrystalline Materials*, **Transactions of the Indian Institute of Metals**, https://doi.org/10.1007/s12666-019-01739-4. - A Biswas, MRG Prasad, N Vajragupta, H ul Hassan, F Brenne, T Niendorf and A Hartmaier, *Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic Components*, **Advanced Engineering Materials**, https://doi.org/10.1002/adem.201900275. - L Kuna, J Mangeri, EP Gorzkowski, JA Wollmershauser and S Nakhmanson, *Mesoscale modeling of polycrystalline light transmission*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2019.06.001. - Q Xu, J Tu and Z Lu, *Development of the FE In-House Procedure for Creep Damage Simulation at Grain Boundary Level*, **Metals**, vol. 9, pp. 656. - L Koschmieder, S Hojda, M Apel, R Altenfeld, Y Bami, C Haase, M Lin, A Vuppala, G Hirt and GJ Schmitz, *AixViPMaP - an Operational Platform for Microstructure Modeling Workflows*, **Integrating Materials and Manufacturing Innovation**, https://doi.org/10.1007/s40192-019-00138-3. - B Pulatsu, E Erdogmus, PB Lourenco and R Quey, *Simulation of uniaxial tensile behavior of quasi-brittle materials using softening contact models in DEM*, **International Journal of Fracture**, https://doi.org/10.1007/s10704-019-00373-x. - L Hu, S-y Jiang, L-X Shi and Y-Q Zhang, *Prediction of grain scale plasticity of NiTi shape memory alloy based on crystal plasticity finite element method*, **Transactions of Nonferrous Metals Society of China**, vol. 29, pp. 775-784, 2019. - T Kawamori, Q Ru and KL Vodopyanov, *Comprehensive Model for Randomly Phase-Matched Frequency Conversion in Zinc-Blende Polycrystals and Experimental Results for ZnSe*, **Physical Review Applied**, vol. 11, pp. 054015, 2019. - L Filipovic, *A method for simulating the influence of grain boundaries and material interfaces on electromigration*, **Microelectronics Reliability**, vol. 97, pp. 38-52, 2019. - K Balusu, R Kelton, EI Meletis and H Huang, *Investigating the relationship between grain orientation and surface height changes in nickel polycrystals under tensile plastic deformation*, **Mechanics of Materials**, https://doi.org/10.1016/j.mechmat.2019.04.011. - HS Abdullahi, Y Liang and S Gao, *Predicting the elastic properties of closed-cell aluminum foams: a mesoscopic geometric modeling approach*, **SN Applied Sciences**, https://doi.org/10.1007/s42452-019-0382-y. - Y Liu, A Van Pamel, PB Nagy and P Cawley, *Investigation of ultrasonic backscatter using three-dimensional finite element simulations*, **The Journal of the Acoustical Society of America**, vol. 145, pp..1584, 2019. - R Ma and TJ Truster, *FFT-based homogenization of hypoelastic plasticity at finite strains*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2019.02.037. - B Zhang, M Dodaran, S Ahmed, S Shao, WJ Meng, KJ Juul and KL Nielsen, *Grain-size affected mechanical response and deformation behavior in microscale reverse extrusion*, **Materialia**, https://doi.org/10.1016/j.mtla.2019.100272. - XF Li, HB Li and J Zhao, *The role of transgranular capability in grain-based modelling of crystalline rocks*, **Computers and Geotechnics**, vol. 110, pp. 161-183, 2019. - H Zhang, A Jérusalem, E Salvati, C Papadaki, KS Fong, X Song and AM Morsunsky, *Multi-scale mechanisms of Twinning-detwinning in magnesium AZ31B alloy simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2019.02.018. - X Gao, X Zhang, M Qian and L Geng, *Effect of reinforcement shape on fracture behaviour of SiC/Al composites with network architecture*, **Composite Structures**, https://doi.org/10.1016/j.compstruct.2019.02.067. - H Kanso, R Patte, V Baltz and D Ledue, *Influence of finite-size and edge effects on the exchange-bias properties of ferromagnetic/antiferromagnetic nanodots: Granular Monte Carlo investigation*, **Physical Review B**, https://doi.org/10.1103/physrevb.99.054410. - R Carson and P Dawson, *Formulation and Characterization of a Continuous Crystal Lattice Orientation Finite Element Method (LOFEM) and its Application to Dislocation Fields*, **Journal of the Mechanics and Physics of Solids**, https://doi.org/10.1016/j.jmps.2019.02.006. - R Berthelsen and A Menzel, *Computational homogenisation of thermo-viscoplastic composites: Large strain formulation and weak micro-periodicity*, **Computer Methods in Applied Mechanics and Engineering**, https://doi.org/10.1016/j.cma.2018.12.032. - X Wang and M Cai, *A comprehensive parametric study of grain-based models for rock failure process simulation*, **International Journal of Rock Mechanics and Mining Sciences**, vol. 115, pp. 60-76, 2019. - LF Orozco, J-Y Delenne, P Sornay and F Radjai, *Discrete-element model for dynamic fracture of a single particle*, **International Journal of Solids and Structures**, https://doi.org/10.1016/j.ijsolstr.2019.01.033. - X Xiao, L Chen, L Yy and H Duan, *Modelling nano-indentation of ion-irradiated FCC single crystals by strain-gradient crystal plasticity theory*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2019.01.005. - D Liu, T Ma, W Lichen, Y Liu, T Zhao, F-X Hu, J Sun and B Shan, *Computational analysis of microstructure-coercivity relation in multi-main-phase Nd-Ce-Fe-B magnets*, **Journal of Physics D: Applied Physics**, https://doi.org/10.1088/1361-6463/aaff42. - N Zhao, A Roy, W Wang, L Zhao and VV Silberschmidt, *Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel*, **Mechanics of Materials**, https://doi.org/10.1016/j.mechmat.2019.01.006. - X Gao, X Zhang and L Geng, *Strengthening and fracture behaviors in SiCp/Al composites with network particle distribution architecture*, **Materials Science and Engineering: A**, vol. 740-741, pp..353--362, 2019. - G Grabowski, *Modelling of thermal expansion of single- and two-phase ceramic polycrystals utilising synthetic 3D microstructures*, **Computational Materials Science**, vol. 156, pp. 7--16, 2019. - D Zhu, S Tu, H Ma, H Wei, H Li and C Wang, *Modeling and calculating for the compaction characteristics of waste rock masses*, **International Journal for Numerical and Analytical Methods in Geomechanics**, vol. 43, pp. 257-271, 2019. - S Yang, J Dirrenberger, E Monteiro and N Ranc, *Representative volume element size determination for viscoplastic properties in polycrystalline materials*, **International Journal of Solids and Structures**, vol. 158, pp. 210-219, 2019. - K Zhang, B Holmedal, T Manik and A Saai, *Assessment of advanced Taylor models, the Taylor factor and yieldsurface exponent for FCC metals*, **International Journal of Plasticity**, vol. 114, pp. 144-160, 2019. - L Hu, S Jiang, J Tu and Z Zhou, *Subgrain Effect on Grain Scale Plasticity of NiTi Shape Memory Alloy Under Canning Compression: A Crystal Plasticity Finite Element Analysis*, **Metals and Materials International**, vol. 25, pp. 333-342, 2019. - JV Kobylinski, R Lawitzki, M Hofmann, C Krempaszky and E Werner, *Micromechanical behaviour of Ni-based superalloys close to the yield point: a comparative study between neutron diffraction on different polycrystalline microstructures and crystal plasticity finite element modelling*, **Continuum Mechanics and Thermodynamics**, vol. 31, pp. 691-702, 2019. 2018 ---- - PR Dawson, DE Boyce, J-S Park, E Wielewski and MP Miller, *Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions*, **Acta Materialia**, vol. 144, pp. 92-106, 2018. - TJ Truster, *DEIP, discontinuous element insertion Program — Mesh generation for interfacial finite element modeling*, **SoftwareX**, vol. 7, pp. 162--170, 2018. - B Flipon, L Milhem, C Keller, R Quey, F Barbe, *Modelling of polycrystals using well-controlled Voronoi-type tessellations and its applications to micromechanical analyses*, **Physics and Mechanics of Random Media: from Morphology to Material Properties, F Willot and S Forest (Eds), Presse des Mines, Paris, France**, ch 23, pp. 187-198, 2018. - M Montanari and N Petrinic, *OpenGJK for C, C# and Matlab: Reliable solutions to distance queries between convex bodies in three-dimensional space*, **SoftwareX**, pp. 352-355, vol. 7, 2018. - X Zhang, Y Mu, M Dodaran, S Shao, D Moldovan and WJ Meng, *Mechanical failure of CrN/Cu/CrN interfacial regions under tensile loading*, **Acta Materialia**, vol. 160, pp. 1-13, 2018. - B Barzdajn, AT Paxton, D Stewart, FPE Dunne, *A Crystal Plasticity Assessment of Normally-loaded Sliding Contact in Rough Surfaces and Galling*, **Journal of the Mechanics and Physics of Solids**, vol. 121, pp. 517-542, 2018. - S Chandra, MK Samal, R Kapoor, N Naveen Kumar, VM Chavan and S Raghunathan, *Deformation behavior of Nickel-based superalloy Su-263: Experimental characterization and crystal plasticity finite element modeling*, **Materials Science and Engineering: A**, vol. 735, pp. 19-30, 2018. - R Quey, A Villani and C Maurice, *Nearly uniform sampling of crystal orientations*, **Journal of Applied Crystallography**, vol. 51, pp. 1162-1173, 2018. - K Chatterjee, MP Echlin, M Kasemer, PG Callahan, TM Pollock and P Dawson, *Prediction of tensile stiffness and strength of Ti-6Al-4V using instantiated volume elements and crystal plasticity*, **Acta Materialia**, vol. 157, pp. 21-32, 2018. - A Abdelaziz, Q Zhao and G Grasselli, *Grain based modelling of rocks using the combined finite-discrete element method*, **Computers and Geotechnics**, vol. 103, pp. 73-81, 2018. - M Marvi-Mashhadi, CS Lopez and J LLorca, *Effect of anisotropy on the mechanical properties of polyurethane foams: an experimental and numerical study*, **Mechanics of Materials**, vol. 124, pp. 143-154, 2018. - N Zhao, W Wang and Y Liu, *Intergranular mechanical behavior in a blade groove-like component by crystal plasticity model with cohesive zone model*, **Engineering Fracture Mechanics**, vol. 201, pp. 196-213, 2018. - B Hudobivnik, F Aldakheel and P Wriggers, *A low order 3D virtual element formulation for finite elasto–plastic deformations*, **Computational Mechanics**, https://doi.org/10.1007/s00466-018-1593-6. - AA El-Aty, Y Xu, S Ha and S-H Zhang, *Computational homogenization of tensile deformation behaviors of a third generation Al-Li alloy 2060-T8 using crystal plasticity finite element method*, **Materials Science and Engineering: A**, vol. 731, pp. 583-594, 2018. - Z Feng, H Li, J Yang, H Huang, G Li and D Huang, *Macro-meso scale modeling and simulation of surface roughening: Aluminum alloy tube bending*, **International Journal of Mechanical Sciences**, https://doi.org/10.1016/j.ijmecsci.2018.06.032. - I Benedetti and V Gulizzi, *A grain-scale model for high-cycle fatigue degradation in polycrystalline materials*, **International Journal of Fatigue**, pp. 90-105, vol. 116, 2018. - X Wang and M Cai, *Modeling of brittle rock failure considering inter- and intra-grain contact failures*, **Computers and Geotechnics**, vol. 101, pp. 224-244, 2018. - D de Bortoli, F Adziman, EA de Souza Neto and FM Andrade Pires, *Constitutive modelling of mechanically induced martensitic transformations: Prediction of transformation surfaces*, **Engineering Computations**, vol. 35, pp. 772-799, https://doi.org/10.1108/EC-03-2017-0087. - I Benedetti, *A Cohesive-frictional Grain-boundary Technique for Microstructural Analysis of Polycrystalline Materials*, **Advances in Computational Coupling and Contact Mechanics**, https://doi.org/10.1142/9781786344786_0009. - I Gribanov, R Taylor and R Sarracino, *Cohesive zone micromechanical model for compressive and tensile failure of polycrystalline ice*, **Engineering Fracture Mechanics**, https://doi.org/10.1016/j.engfracmech.2018.04.023. - M Ghodrati, M Ahmadian and R Mirzaeifar, *Modeling of Rolling Contact Fatigue in Rails at the Microstructural Level*, **Wear**, https://doi.org/10.1016/j.wear.2018.04.016. - A Van Pamel, G Sha, MJS Lowe and SI Rokhin, *Numerical and analytic modelling of elastodynamic scattering within polycrystalline materials*, **The Journal of the Acoustical Society of America**, vol. 143, pp. 2394, 2018. - I Gribanov, R Taylor and R Sarracino, *Parallel implementation of implicit finite element model with cohesive zones and collision response using CUDA*, **International Journal for Numerical Methods in Engineering**, https://doi.org/10.1002/nme.5825. - M Bouchedjra, T Kanit, C Boulemia, A Amrouche and MEA Belouchrani, *Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria*, **European Journal of Mechanics - A/Solids**, https://doi.org/10.1016/j.euromechsol.2018.04.011. - E Alabort, D Barba, S Sulzer, M Libner, N Petrinic and RC Reed, *Grain boundary properties of a nickel-based superalloy: characterisation and modelling*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2018.03.059. - H Yuan, W Zhang, GM Castelluccio, J Kim and Y Liu, *Microstructure-sensitive Estimation of Small Fatigue Crack Growth in Bridge Steel Welds*, **International Journal of Fatigue**, https://doi.org/10.1016/j.ijfatigue.2018.03.015. - Y Liu, Y Zhu, C Oskay, P Hu, L Ying and D Wang, *Experimental and Computational Study of Microstructural Effect on Ductile Fracture of Hot-Forming Materials*, **Materials Science and Engineering: A**, https://doi.org/10.1016/j.msea.2018.03.049. - J Fischbacher, A Kovacs, M Gusenbauer, H Oezelt, L Exl, S Bance and T Schrefl, *Micromagnetics of rare-earth efficient permanent magnets*, **Journal of Physics D: Applied Physics**, https://doi.org/10.1088/1361-6463/aab7d1. - SI Ranganathan, MR Murshed and L Costa, *Heterogeneous Anisotropy Index and scaling in two-phase random polycrystals*, **Acta Mechanica**, https://doi.org/10.1007/s00707-018-2114-6. - A Vidyasagar, AD Tutcuoglu and DM Kochmann, *Deformation patterning in finite-strain crystal plasticity by spectral homogenization with application to magnesium*, **Computer Methods in Applied Mechanics and Engineering**, accepted. - M Madivala, A Schwedt, SL Wong, F Roters, U Prahl and W Bleck, *Temperature dependent strain hardening and fracture behavior of TWIP steel*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2018.02.001. - O Johnson and C Kurniawan, *An efficient algorithm for generating diverse microstructure sets and delineating properties closures*, **Acta Materialia**, vol. 147, pp. 313-321, 2018. - C Müller, T Frühwirt, D Haase, R Schlegel and H Konietzky, *Modeling deformation and damage of rock salt using the discrete element method*, **International Journal of Rock Mechanics and Mining Sciences**, vol. 103, pp. 230-241, 2018. - D Barba, E Alabort, D Garcia-Gonzalez, JJ Moverare, RC Reed and A Jérusalem, *A thermodynamically consistent constitutive model for diffusion-assisted plasticity in Ni-based superalloys*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2017.12.007. - M Ryzy, T Grabec, P Sedlak and IA Veres, *Influence of grain morphology on ultrasonic wave attenuation in polycrystalline media with statistically equiaxed grains*, **The Journal of the Acoustical Society of America**, vol. 143, pp. 219-229, 2018. - R Quey and L Renversade, *Optimal polyhedral description of 3D polycrystals: method and application to statistical and synchrotron X-ray diffraction data*, **Computer Methods in Applied Mechanics and Engineering**, vol. 330, pp. 308-333, 2018. - P Liu, H Xu, D Wang, C Wang, C Schulze and M Oeser, *Comparison of mechanical responses of asphalt mixtures manufactured by different compaction methods*, **Construction and Building Materials**, vol. 162, pp. 765-780, 2018. - I Benedetti, V Gulizzi and A Milazzo, *Grain-boundary modelling of hydrogen assisted intergranular stress corrosion cracking*, **Mechanics of Materials**, https://doi.org/10.1016/j.mechmat.2017.11.001. - M Ekh, N Larijani, E Dartfeldt, M Kapp and R Pippan, *Prediction of the mechanical behaviour of pearlitic steel based on microcompression tests, micromechanical models and homogenization approaches*, **European Journal of Mechanics - A/Solids**, vol. 67, pp. 272-279, 2018. - J Liu, L Li, G Dirras, K Ameyama, F Cazes and M Ota, *A three-dimensional multi-scale polycrystalline plasticity model coupled with damage for pure Ti with harmonic structure design*, **International Journal of Plasticity**, vol. 100, 192-207, 2018. - G Zhang, GA Gazonas and F Bobaru, *Supershear damage propagation and sub-Rayleigh crack growth from edge-on impact: a peridynamic analysis*, **International Journal of Impact Engineering**, https://doi.org/10.1016/j.ijimpeng.2017.11.010. 2017 ---- - X Zhang and C Oskay, *Material and morphology parameter sensitivity analysis in particulate composite materials*, **Computational Mechanics**, https://doi.org/10.1007/s00466-017-1512-2. - B Xi, G Fang and S Xu, *Multiscale mechanical behavior and microstructure evolution of extruded magnesium alloy sheets: Experimental and crystal plasticity analysis*, **Materials Characterization**, https://doi.org/10.1016/j.matchar.2017.11.034. - L Hu, S Jiang, Y Zhang and D Sun, *Crystal Plasticity Finite Element Simulation of NiTi Shape Memory Alloy Based on Representative Volume Element*, **Metals and Materials International**, vol. 23, pp. 1075-1086, 2017. - J Fischbacher, A Kovacs, H Oezelt, M Gusenbauer, D Suess and T Schrefl, *Effective uniaxial anisotropy in easy-plane materials through nanostructuring*, **Applied Physics Letters**, https://doi.org/10.1063/1.4997816. - S Chandra, MK Samal, VM Chavan and S Raghunathan, *Hierarchical multiscale modeling of plasticity in copper: From single crystals to polycrystalline aggregates*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2017.10.014. - S Rescka, L Munk, P Wriggers and HJ Maier, *An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal-Plasticity Model*, **Journal of Materials Eigineering and Performance**, https://doi.org/10.1007/s11665-017-3046-3. - Y Morris Wang, T Voisin, JT McKeown, J Ye, NP Calta, Z Li, Z Zeng, Y Zhang, W Chen, T Tran Roehling, RT Ott, MK Santala, PJ Depond, MJ Matthews, AV Hamza and T Zhun, *Additively manufactured hierarchical stainless steels with high strength and ductility*, **Nature Materials**, https://doi.org/10.1038/NMAT5021. - H Li, J Li, B Tang, J Fan and H Yuan, *Simulation of intergranular ductile cracking in beta titanium alloys based on a micro-mechanical damage model*, **Materials**, vol. 10, pp. 1250, 2017. - L Hu, S Jiang, T Zhou, J Ti, L Shi, Q Chen and M Yang, *Multiscale Modeling of Polycrystalline NiTi Shape Memory Alloy under Various Plastic Deformation Conditions by Coupling Microstructure Evolution and Macroscopic Mechanical Response*, **Materials**, vol. 10, pp. 1172, 2017. - L Hu, S Jiang, Y Zhang, X Zhu and D Sun, *Influence of slip system combination models on crystal plasticity finite element simulation of NiTi shape memory alloy undergoing uniaxial compression*, **Progress in Natural Science: Materials International**, https://doi.org/10.1016/j.pnsc.2017.08.017. - M Khadyko, CD Marioara, S Dumoulin, T Borvik and OS Hopperstad, *Effects of heat-treatment on the plastic anisotropy of extruded aluminium AA6063*, **Materials Science and Engineering A**, vol. 708, pp. 208-221, 2017. - Y Ayed, C Robert, G Germain and A Ammar, *Orthogonal micro-cutting modeling of the Ti17 titanium alloy using the crystal plasticity theory*, **Finite Elements in Analysis and Design**, vol. 137, pp. 43-55, 2017. - A Vijay, N Paulson and F Sadeghi, *A 3D Finite Element Modelling of Crystalline Anisotropy in Rolling Contact Fatigue*, **International Journal of Fatigue**, https://doi.org/10.1016/j.ijfatigue.2017.09.016. - M Sledzinska, R Quey, B Mortazavi, B Graczykowski, M Placidi, D Saleta Reig, D Navarro Urrios, F Alzina, L Colombo, S Roche and CM Sotomayor Torres, *Record Low Thermal Conductivity of Polycrystalline MoS2 films: Tuning the Thermal Conductivity by Grain Orientation*, **ACS Applied Materials & Interfaces**, vol. 9, pp. 37905-37911, 2017. - NY Juul, J Oddershede, A Beaudoin, K Chatterjee, MKA Koker, D Dale, P Shade and G Winther, *Measured resolved shear stresses and Bishop-Hill stress states in individual grains of austenitic stainless steel*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2017.09.021. - N Guo, C Sun, M Fu and M Han, *Misorientation-Dependent Twinning Induced Hardening and Texture Evolution of TWIP Steel Sheet in Plastic Deformation Process*, **Metals**, pp. 348, vol. 7, 2017. - J Zhao, L Lv, G Liu and K Wang, *Analysis of deformation inhomogeneity and slip mode of TA15 titanium alloy sheets during the hot tensile process based on crystal plasticity model*, **Materials Science and Engineering A**, https://doi.org/10.1016/j.msea.2017.08.094, 2017. - O Barrera, A Cocks and A Ponter, *Advances in Direct Methods for Materials and Structures*, **Springer**, ISBN : 3319598104, 9783319598109, 217 pages, 2017. - D Magisano, E Charkaluk, G de Saxcé and T Kanit, *Shakedown Within Polycrystals: A Direct Numerical Assessment*, **Advances in Direct Methods for Materials and Structure**, pp. 29-50, 2017. - K Chatterjee, JYP Ko, JT Weiss, HT Philipp, J Becker, P Purohit, S.M Gruner and A.J Beaudoin, *Study of residual stresses in Ti-7Al using theory and experiments*, **Journal of the Mechanics and Physics of Solids**, vol. 109, pp. 95-116, 2017. - H Yuan, W Zhang, J Kim and Y Liu, *A Nonlinear Grain-based Fatigue Damage Model for Civil Infrastructure under Variable Amplitude Loads*, **International Journal of Fatigue**, https://doi.org/10.1016/j.ijfatigue.2017.07.026, 2017. - E Guyon, JY Delenne and F Radjai, *Matière en grains*, **book edited by Odile Jacob**, ISBN : 978-2-7381-3709-8, 2017. - M Kasemer, MP Echlin, JC Stinville, TM Pollock and P Dawson, *On slip initiation in equiaxed alpha/beta Ti-6Al-4V*, **Acta Materialia**, https://doi.org/10.1016/j.actamat.2017.06.059, 2017. - Y Charles, HT Nguyen and M Gaspérini, *Comparison of hydrogen transport through pre-deformed synthetic polycrystals and homogeneous samples by finite element analysis*, **International Journal of Hydrogen Energy**, https://doi.org/10.1016/j.ijhydene.2017.06.016, 2017. - S El Shawish and L Cizelj, *Combining Single- and Poly-Crystalline Measurements for Identification of Crystal Plasticity Parameters: Application to Austenitic Stainless Steel*, **Crystals**, vol. 7, https://doi.org/10.3390/cryst7060181, 2017. - PJ Zhao, ZH Chen and CF Dong, *Investigation and prediction of tearing failure during extrusion based on a modified shear damage model*, **Mechanics of Materials**, https://doi.org/10.1016/j.mechmat.2017.05.008, 2017. - S Natarajan, ET Ooi, A Saputra and C Song, *A scaled boundary finite element formulation over arbitrary faceted star convex polyhedra*, **Engineering Analysis with Boundary Elements**, pp. 218-229, vol. 80, 2017. - R Carson, M Obstalecki, M Miller and P Dawson, *Characterizing Heterogeneous Intragranular Deformations in Polycrystalline Solids Using Diffraction-Based and Mechanics-Based Metrics*, **Modelling and Simulation in Materials Science and Engineering**, vol. 25, pp. 055008, 2017 (made cover of the Journal) - J Fischbacher, A Kovacs, H Oezelt, T Schrefl, L Exl, J Fidler, D Suess, N Sakuma, M Yano, A Kato, T Shoji, and A Manabe, *Nonlinear conjugate gradient methods in micromagnetics*, **AIP Advances**, vol. 7, pp. 045310, 2017. - M Petersmann, T Antretter, T Waitz and FD Fischer, *A new approach predicting the evolution of laminated nanostructures--martensite in NiTi as an example*, **Modelling and Simulation in Materials Science and Engineering**, vol. 25, pp. 035004, 2017. - E Ma and T Zhu, *Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals*, **Materials Today**, vol. 7, pp. 67--76, 2017. - M Kasemer, R Quey and P Dawson, *The Influence of Mechanical Constraints Introduced by beta Annealed Microstructures on the Yield Strength and Ductility of Ti-6Al-4V*, **Journal of the Mechanics and Physics of Solids**, accepted. - VP Nguyen, CT Nguyen, T Rabczuk and S Natarajan, *On a family of convected particle domain interpolations in the material point method*, **Finite Elements in Analysis and Design**, vol. 126, pp. 50-64, 2017. - L Zhang, W Xu, C Liu, X Ma and J Long, *Quantitative analysis of surface roughness evolution in FCC polycrystalline metal during uniaxial tension*, **Computational Materials Science**, vol. 132, pp. 19-29, 2017. - Z Wang and P Li, *Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina*, **Ceramics International**, https://doi.org/10.1016/j.ceramint.2017.02.121, 2017. - MR Kabir and H Richter, *Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy*, **Materials**, vol. 10, p 35, 2017. - B Mortazavi, R Quey, H Ostadhossein, A Villani, N Moulin, A.C.T Van Duin, and T Rabczuk, *Strong thermal transport along polycrystalline transition metal dichalcogenides revealed by multiscale modelling for MoS2*, **Applied Materials Today**, vol. 7, pp. 67-76, 2017. - MR Murshed and SI Ranganathan, *Hill-Mandel condition and bounds on lower symmetry elastic crystals*, **Mechanics Research Communications**, vol. 81, pp. 7-10, 2017. - E Wielewski, DE Boyce, J-S Park, MP Miller and PR Dawson, *A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics*, **Acta Materialia**, vol. 126, pp. 469-480, 2017. - MR Murshed and SI Ranganathan, *Scaling laws in elastic polycrystals with individual grains belonging to any crystal class*, **Acta Mechanica**, https://doi.org/10.1007/s00707-016-1774-3. - H Oezelt, E Kirk, P Wohlhuter, E Muller, LJ Heyderman, A Kovacs and T Schrefl, *Vortex motion in amorphous ferrimagnetic thin film elements*, **AIP Advances**, vol. 7, 056001, 2017. - S Gupta, AJ Beaudoin and J Chevy, *Strain rate jump induced negative strain rate sensitivity (NSRS) in aluminum alloy 2024: Experiments and constitutive modeling*, **Materials Science and Engineering A**, vol. 683, pp. 143-152, 2017. - Y Lv, H Li, X Zhu and W Liu, *Discrete element method simulation of random grain-based models*, **Cluster Computing**, https://doi.org/10.1007/s10586-016-0705-3. - CH Pham, S Thuillier and P-Y Manach, *Prediction of flow stress and surface roughness of stainless steel sheets considering an inhomogeneous microstructure*, **Materials Science & Engineering A**, vol. 678, pp. 377-388, 2017. - M Toifl, P Hartlieb, R Meisels, T Antretter and F Kuchar, *Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite*, **Minerals Engineering**, vol. 103-104, pp. 78-92, 2017. - F Adzima, T Balan, PY Manach, N Bonnet and L Tabourot, *Crystal plasticity and phenomenological approaches for the simulation of deformation behavior in thin copper alloy sheets*, **International Journal of Plasticity**, https://doi.org/10.1016/j.ijplas.2016.06.003. 2016 ---- - TJ Truster, *On interface element insertion into three-dimensional meshes*, **Engineering Fracture Mechanics**, vol. 153, pp. 171--174, 2016. - A Van Pamel, G Sha, SI Rokhlin and MJS Lowe, *Finite element modelling of elastic wave propagation and scaterring within heterogeneous media*, **Mathematical, Physical and Engineering Sciences**, vol. 473, 20160738, 2016. - G Lhoutellier, D Ledue, R Patte and V Baltz, *Monte Carlo investigation of how interfacial magnetic couplings affect blocking temperature distributions in exchange bias bilayers*, **Jounal of Applied Physics**, vol. 120, pp. 193902, 2016. - A Zouaghi, V Velay, A Soveja, T Pottier, M Cheikh and F Rézai-Aria, *A multi-scale approach to investigate the non linear subsurface behavior and strain localization of X38CrMoV5-1 martensitic tool steel: experiment and numerical analysis*, **International Journal of Plasticity**, vol. 87, pp. 130-153, 2016. - S Beese, S Loehnert and P Wriggers, *Modeling of Fracture in Polycrystalline Materials*, Chapter in **Advances in Discretization Methods**, SEMA SIMAI Springer Series. - M Sledzinska, B Graczykowski, M Placidi, D Saleta Reig, A El Sachat, J.S Reparaz, F Alzina, B Mortazavi, R Quey, L Colombo, S Roche and C.M Sotomayor Torres, *Thermal conductivity of MoS2 polycrystalline nanomembranes*, **2D Materials**, vol. 3, p 035016, 2016. - D Cantor, E Azéma, P Sonnay and F Radjai, *Three-dimensional bonded-cell model for grain fragmentation*, **Computational Particle Mechanics**, https://doi.org/10.1007/s40571-016-0129-0. - M Khadyko, S Dumoulin and OS Hopperstad, *Texture gradients and strain localisation in extruded aluminium profile*, **International Journal of Solids and Structures**, vol. 97-98, pp. 239-255, 2016. - H Liu, Y Shen, J Ma, P Zheng and L Zhang, *Grain Size Dependence of Uniform Elongation in Single-Phase FCC/BCC Metals*, **Journal of Materials Engineering and Performance**, 25: 3599, 2016. - I Benedetti, V Gulizzi and V Mallardo, *A grain boundary formulation for crystal plasticity*, **International Journal of Plasticity**, vol. 83, pp. 202-224, 2016. - X Wei, C Dong, Z Chen K Xiao and X Li, *The effect of hydrogen on the evolution of intergranular cracking: a cross-scale study using first-principles and cohesive finite element methods*, **RSC Advances**, vol. 6, pp. 27282-27292, 2016. - T Sadowski and B Pankowski, *Numerical Modelling of Two-phase Ceramic Composite Response under Uniaxial Loading*, **Composite Structures**, vol. 143, pp./ 388-394, 2016. - P Baudoin, V Magnier, A El Bartali, J.-F Witz, Ph Dufrenoy, F Demilly and E Charkaluk, *Numerical investigation of fatigue strength of grain size gradient materials under heterogeneous stress states in a notched specimen*, **International Journal of Fatigue**, vol. 87, pp. 132-142, 2016. - E Svenning, M Fagerström and F Larsson, *On computational homogenization of microscale crack propagation*, **International Journal for Numerical Methods in Engineering**, vol. 108, pp. 76-90, 2016. - M Toifl, R Meisels, P Hartlieb, F Kuchar and Th Antretter, *3D numerical study on microwave induced stresses in inhomogeneous hard rocks*, **Minerals Engineering**, vol. 90, pp. 29-42, 2016. - R Brommesson, M Ekh and C Joseph, *3D grain structure modelling of intragranular fracture in forged Haynes 282*, **Engineering Fracture Mechanics**, vol. 154, pp. 57-71, 2016. - T Auger, S Hémery, M Bourcier, C Berdin, M Martin and I Robertson, *Crack path in liquid metal embrittlement: experiments with steels and modeling*, **Fracture and Structural Integrity**, vol. 35, pp. 250-259, 2016. - S El Shawish and L Cizelj, *Numerical investigation of grain misorientations at and close to the free surface of FCC polycrystalline metals*, **Computational Materials Science**, vol. 113, pp. 133-142, 2016. - E Renner, Y Gaillard, F Richard, F Amiot and P Delobelle, *Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel*, **International Journal of Plasticity**, vol. 77, pp. 118-140, 2016. - JV Beeck, F Maresca, TWJ de Geus, PJG Schreurs and MGD Geers, *Predicting deformation-induced polymer-steel interface roughening and failure*, **European Journal of Mechanics / A Solids**, vol. 55, pp. 1-11, 2016. 2015 ---- - R Quey, JH Driver and PR Dawson *Intra-grain orientation distributions in hot-deformed aluminium: Orientation dependence and relation to deformation mechanisms*, **Journal of the Mechanics and Physics of Solids**, vol. 84, pp. 506-527, 2015. - J Zhang, ZH Chen and CF Dong, *Simulating Intergranular Stress Corrosion Cracking in AZ31 Using Three-Dimensional Cohesive Elements for Grain Structure*, **Journal of Materials Engineering and Performance**, vol. 24, pp. 4908-4918, 2015 - A Van Pamel, CR Brett, P Huthwaite and MJS Lowe, *Finite element modelling of elastic wave scattering within a polycrystalline material in two and three dimensions*, **Journal of the Acoustical Society of America**, vol. 138, pp. 2326-2336, 2015. - V Gulizzi, A Milazzo and I Benedetti, *An enhanced grain-boundary framework for computational homogenization and micro-cracking simulations of polycrystalline materials*, **Computational Mechanics**, DOI 10.1007/s00466-015-1192-8. - A Cruzadoa, B Gana, M Jiméneza, D Barbaa, K Ostolazab, A Linazab, JM Molina-Aldareguiaa, J Llorcaa and J Segurado, *Multiscale modeling of the mechanical behavior of IN718 superalloy based on micropillar compression and computational homogenization* , **Acta Materialia**, vol. 98, pp. 242-253, 2015. - E Svenning, *On computational homogenization of fracturing continua* , **Licentiate Thesis**, Chalmers Univeristy of Technology, 2015. - L Zhang, W Xu, J Long and Z Lei, *Surface Roughening Analysis of Cold Drawn Tube Based on Macro-micro Coupling Finite Element Method*, **Journal of Materials Processing Technology**, vol. 224, pp. 189-199, 2015. - SL Wong, M Obstalecki, MP Miller and PR Dawson, *Stress and deformation heterogeneity in individual grains within polycrystals subjected to fully reversed cyclic loading*, **Journal of the Mechanics and Physics of Solids**, vol. 79, pp. 157-185, 2015. - H Oezelt, A Kovacs, F Reichel, J Fischbacher, S Bance, M Gusenbauer, C Schubert, M Albrecht and T Schrefl, *Micromagnetic simulation of exchange coupled ferri-/ferromagnetic heterostructures*, **Journal of Magnetism and Magnetic Materials**, vol. 381, pp. 28-33, 2015. - G Lhoutellier, D Ledue, R Patte, F Barbe, B Dierny and V Baltz, *Bimodal distribution of blocking temperature for exchange-bias ferromagnetic/antiferromagnetic bilayers: a granular Monte Carlo study with less stable magnetic regions spread over the interface*, **Journal of Physics D: Applied Physics**, 2015. - L-T Li, YC Lin, L Li, L-M Shen and D-X Wen, *Three-Dimensional Crystal Plasticity Finite Element Simulation of Hot Compressive Deformation Behaviors of 7075 Al Alloy*, **Journal of Materials Engineering and Performance**, vol. 24, pp. 1294-1304, 2015. - H Oezelt, A Kovacs, P Wohlhüter, E Kirk, D Nissen, P Matthes, LJ Heyderman, M Albrecht and T Schrefl, *Micromagnetic simulation of exchange coupled ferri-/ferromagnetic composite in bit patterned media*, **Journal of Applied Physics**, vol. 117, 17E501, 2015. 2014 ---- - MP Miller and PR Dawson, *Understanding local deformation in metallic polycrystals using high energy X-rays and finite elements*, **Current Opinion in Solid State and Materials Science**, vol. 18, pp. 286-299, 2014. - A Acerboa, M Miller and J Ruffc, *2014 CHESS Users’ Meeting and Workshops*, **Synchrotron Radiation News**, vol. 27, pp. 21-24, 2014. - E Ghazvinian, MS Diederichs and R Quey, *3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing*, **Journal of Rock Mechanics and Geotechnical Engineering**, vol. 6, pp. 506-521, 2014. - K Zhang, B Holmedal, OS Hopperstad and S Dumoulin, *Modelling the plastic anisotropy of aluminum alloy 3103 sheets by polycrystal plasticity*, **Modelling and Simulation in Materials Science and Engineering**, vol. 22, pp. 75015-75034, 2014. - S Falco, P Siegkas, E Barbieri and N Petrinic, *A new method for the generation of arbitrarily shaped 3D random polycrystalline domains,* **Computational Mechanics**, vol. 54, pp. 1447-1460, 2014. - V Lacaille, C Morel, E Feulvarch and G Kermouche, *Finite element analysis of the grain size effect on diffusion in polycrystalline materials,* **Computational Materials Science**, vol. 95, pp. 187-191, 2014. - DL Cortie, AG Biternas, RW Chantrell, XL Wang and F Klose, *Microscopic model for exchange bias from grain-boundary disorder in a ferromagnet/antiferromagnet thin film with a nanocrystalline microstructure,* **Applied Physics Letters**, vol. 105, 032402, 2014. - D Ledue, A Maitre, F Barbe and L Lechevallier, *Temperature dependence of the exchange bias properties of ferromagnetic/antiferromagnetic polycrystalline bilayers,* **Journal of Magnetism and Magnetic Materials**, vol. 372, pp. 134-140, 2014. - J Deng, D Morgan and I Szlufarska, *Kinetic Monte Carlo simulation of the effective diffusivity in grain boundary networks*, **Computational Materials Science**, vol. 93, pp. 36-45, 2014. - M Obstalecki, SL Wong, PR Dawson and M.P Miller, *Quantitative analysis of crystal scale deformation heterogeneity during cyclic plasticity using high-energy X-ray diffraction and finite-element simulation*, **Acta Materialia**, vol. 75, pp. 259-272, 2014. - L Li, L Shen and G Proust, *A texture-based representative volume element crystal plasticity model for predicting Bauschinger effect during cyclic loading*, **Materials Science and Engineering A**, vol. 608, pp. 174-183, 2014. - K Zang, B Holmedal, OS Hopperstad, S Dumoulin, J Gawad, A Van Bael and P Van Houtte, *Multi-level Modelling of Mechanical Anisotropy of Commercial Pure Aluminium Plate: Crystal Plasticity Models, Advanced Yield Functions and Parameter Identification*, **International Journal of Plasticity**, vol. 66, pp. 3-30, 2015. - D Gonzalez, I Simonovski, PJ Withers and J Quinta da Fonseca, *Modelling the effect of elastic and plastic anisotropies on stresses at grain boundaries*, **International Journal of Plasticity**, vol. 61, pp. 49-63, 2014. 2013 ---- - A Fernández, A Jérusalem, I Gutiérrez-Urrutia and MT Pérez-Prado, *Three-dimensional investigation of grain boundary-twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling*, **Acta Materialia**, vol. 61, pp. 7679-7692, 2013 - SL Wong, J-S Park, M P Miller and P R Dawson, *A framework for generating synthetic diffraction images from deforming polycrystals using crystal-based finite element formulations*, **Computational Materials Science**, vol. 77, pp. 456-466, 2013. - L Li, L Shen, G Proust, Ch KS Moy and G Ranzi, *Three-dimensional crystal plasticity finite element simulation of nanoindentation on aluminium alloy 2024*, **Materials Science and Engineering: A**, vol.. 579, pp. 41-49, 2013. 2012 ---- - J Montalvo-Urquizo, P Bobrov, A Schmidt and W Wosniok, *Elastic responses of texturized microscale materials using FEM simulations and stochastic material properties*, **Mechanics of Materials**, vol. 47, pp. 1-10, 2012. - CN N'Guyen , F Barbe, N Osipov, G Cailletaud, B Marini and C Petry, *Micromechanical local approach to brittle failure in bainite high resolution polycrystals: a short presentation,* **Computational Material Science**, vol. 64, pp. 62-65, 2012. - A Maitre, D Ledue, F Barbe, R Patte, *Temperature effect in polycrystalline exchange-biased bilayers: A Monte Carlo study,* **Journal of Applied Physics**, vol. 111, 07D105, 2012. - R Quey, PR Dawson and JH Driver, *Orientation fragmentation in hot-deformed polycrystalline aluminium: Experiment and simulation*, **Journal of the Mechanics and Physics of Solids**, vol. 60, pp. 509-524, 2012. - A Tahimi, F Barbe, L Taleb, R Quey and A Guillet, *Evaluation of microstructure-based transformation plasticity models from experiments on 100C6 steel*, **Computational Materials Science**, vol. 52, pp. 55-60, 2012. 2011 ---- - R Quey, PR Dawson and F Barbe, *Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing*, **Computer Methods in Applied Mechanics and Engineering**, vol. 200, pp. 1729-1745, 2011. - F Barbe and R Quey, *A numerical modelling of 3D polycrystal-to-polycrystal diffusive phase transformations involving crystal plasticity*, **International Journal of Plasticity**, vol. 27, pp. 823-840, 2011. 2009 ---- - F Barbe, R Quey, A Musienko and G Cailletaud, *Three-dimensional characterization of strain localization bands in high-resolution elastoplastic polycrystals*, **Mechanics Research Communications**, vol. 39, pp. 762-768, 2009. 2008 ---- - H Hoang, F Barbe, R Quey and L Taleb, *FE determination of the plasticity induced during diffusive transformation in the case of nucleation at random locations and instants*, **Computational Materials Science**, vol. 43, pp. 101-107, 2008. - F Barbe, R Quey, L Taleb and E Souza de Cursi, *Numerical modelling of the plasticity induced during diffusive transformation An ensemble averaging approach for the case of random arrays of nuclei*, **European Journal of Mechanics, A/Solids**, vol. 27, pp. 1121-1139, 2008. 2007 ---- - F Barbe, R Quey and L Taleb, *Numerical modelling of the plasticity induced during diffusive transformation Case of a cubic array of nuclei*, **European Journal of Mechanics, A/Solids**, vol. 26, pp. 611-625, 2007.